|
|
|
Stainless Steel Vacuum Pallet 50x60cm |
| The vacuum pallet is
mainly target on paper or similar items, PVC, PET film, thin film,
electronic products, hardness or softness plastics etc., these kind of
flat or regular shaped products will closely adsorb to the pallet
subjected to the reverse pressure from the vacuum pump, the substrates
won’t be uplift with the screen plate, or change it’s position on the
pallet due to the surrounding wind after printing, consequently,
guarantee the accuracy on the next color overprinting. |
 |
| The surface of
The stainless steel vacuum screen pallet was uniformity drilled by
laser(hole diameter 1.2mm, hole distance 20mm, 36 rows in vertical, 29
rows in horizontal, total 1044 aspirating holes), directly
connected with the pallet, maximize the vacuum pumping efficiency.
The adjustable pumping electrical
cabinet was equipped, the rotate speed of the vacuum pump can be
controlled by the stepless speed changed button, adjust the vacuum
pressure as per your need; equipped with foot switch to control the
electricity on-off, turn off the pump when you place the print
substrate, turn on the pump after palced, then the substrate will
adsorbed to the pallet for print, after print, turn off he pump, the
substrate can be take off from the pallet easily. |
| Printing size:52*42cm
Pallet size: 60*50*3.5cm
Power: 240w
Diameter of the hole:1.2mm
Spacing:20mm
Packing size:70*62*20cm
Net weight: 19.5kg
Gross weight: 21.5kg
Voltage:110V
|
 |
|
