|
Features:
1.The
machine is designed for stand up operation, and the user can operate on
the seat. The platform plate is 56 cm away from the ground, and the
machine is equipped with an adjustment foot, the operator can increase
the height of the machine within 18 cm according to needs (the height of
the printing table can be adjusted from 56 to 74 cm).
2.Pallet
size is 40*50 cm, and it is suitable for screen frame inner size 35 cm
wide, 50 cm long; Printing size is 30 cm wide and 44 cm long (within 44
cm of ribbon length at a time).
3.To
guarantee the accuracy of the printing, the machine is equipped with
five different width installation mold:
1.5 cm ribbon user can print 14 pieces at a time (the length of the
ribbon should less than 44 cm) 2 cm ribbon user can print 11 pieces at a
time
2.5 cm ribbon user can print 9 pieces at a time
3 cm ribbon user can print 8 pieces at a time
4 cm ribbon user can print 6 pieces at a time
4.Ribbon
roll up in a roll ,the roller device can place ribbon which the maximum
diameter is 15cm (the diameter of the 100-meter long roll ribbon is
15cm).
5.The
roller device is equipped with clamping pin and anti-slewing ratchet
device, which can effectively control the positioning and reversing of
the winding wheel, so that the ribbon can be take back accurately .
6.This
machine is three-color printing, and equipped with carbon fiber
far-infrared dryer, each color printing chuck can be adjusted up and
down, left and right,forward and back ; It is simple, convenient and
accurate to print.
7.Dryer
can be installed directly on the host disk,and it is equipped with far
infrared probe (attach the dryer operation instruction) and the locating
slot, after printing a color, rotate the dryer to the pallet, the
positioning beads stuck positioning groove is fixed above the pallet,
far-infrared dryer probe turn on automatically (heating time can be
adjusted), after drying rotary dryer (automatic shutdown) next color
printing, and so on.
8.Requirements
for making plate
Length:the length of the
printed pattern should be within 44 cm
Printing width: Each space
between two ribbons is 4mm,the center space of the two adjacent ribbons
is:
1.5cm ribbon：19mm
2cm ribbon：24mm
2.5cm ribbon：29mm
3cm ribbon：34mm
4cm ribbon：44mm |
