Character:
With the screws under the balance frame, the lifting angle and height
of the screen frame can be adjusted as required.
This machine is equipped with 2 gravity balance plates, which can be
installed individually or together according to the request. The
gravity balance plate can move forward and backward in 4 inch. |
Height adjustment: Place the screen
frame flat on the platform. According to the substrate height or
printing requirements, rotate the handle up & down to reach an
appropriate height, then lock the height with the two rear positioning
handles. Left and right adjustment:
loosen the handle on both sides of the press, and rotate the handle
to move slightly left and right as required, after adjustment tighten
both handles.
Back and forward adjustment: First,
slightly loosen that four red knobs overhead the clamp, then loosen the
metal knobs on both sides of the clamp and move front and rear as
required. After adjusting, tighten the metal knobs and four red knobs
on the top.
|