|
Plate or die making is the key
of hot foil stamping. Water soluble photopolymer plate is currently the
simplest, fastest and least—cost plate making method.
This photopolymer
plate has
two layers: the upper layer is photopolymer plate about 0.03 inch thickness, part
of it will solidify after UV exposure, while the rest part without exposure can
dissolve in the water. The lower layer is aluminum plate, about 0.008 inch
thickness.
Parameters
-
High quality water soluble
photopolymer resin plate made in Japan
-
High thermal conductivity
and pollution free
-
Heat resistant up to
302-320F (150-160℃)
-
Simple plate making process
in short time
-
Relief: 0.026" (0.68mm)
-
Base: 0.008" (0.2mm)
-
Size: A4-8.5"X11"(210x297mm)
-
Manual Instruction
|
.jpg)
