Frozen meat slicing machine

Electric Frozen Meat Slicer 110V

http://topseller365.com/data/prd/020/250/196_(4).jpg

Introduction

1). this product is with elegant design and reasonable structure.

2). It is easy and convenient to use and operate it.

3). It is convenient to adjust the thickness of the meat slices. The meat slices cut by this product are very nice.

4). the structure of this product is concise. It is convenient to grind the slicing knife. And it is easy to be repaired and maintained.

Parameter

Cut-off journey:220mm
Slice Thickness:0-15mm
Blade Diameter:φ320 mm
Rated Voltage:110V60HZ
Power:750W+370W

Installation and Use

1). Unfold the package, and put the meat slicer onto a clean and smooth place. (Notice: The behind of the fuselage should stay to have the 150 cm the above space, easy to operation).

2). Connect this product with correct voltage electric power as the user's manual required. Make sure the grounding is well enough.

3). Press the start switch, the slicer start work, let the slicing knife run for 1~2 minutes cutting nothing, make sure that the slicing knife could work normally. (The slicing knife should run counter-clockwise.)

4). Will block the plank fixed position hand handle to adjust to leave to block the plank hereafter first, then regulate the thickness to regulate the knob, the slice thickness that choice need, will block the plank fixed position hand handle to adjust and block the plank contact again, the lock is tightly the form butterfly-shape nut M8 .

5). Put the meat or other food onto the food carrier at the degree about –5℃, and then use the movable food pressing board to press the food and push the food towards the food stopping board.

6). The fully automatic meat slicer, press the Semiautomatic Switch at the above first, then press the Automatic Switch at the below to start cutting. If you want to stop cutting, please press the Stop Button of the Automatic Switch first, and then press the Stop Button of the Semiautomatic Switch to stop cutting.

7). When finished cutting the foot, please adjust the food stopping board back to the "0" scale, and clean the meat slicer.

Framework Diagram for the Product

http://topseller365.com/data/prd/020/250/aaa.png

A： base of the meat slicer

B： automatic body

C： frame?of the foot carrier

D： food carrier

E： guiding stick of the food pressing board?

F： thickness adjusting button

G：slice motor switch?

H：blade motor?switch

I： food stopping board?

J： food pressing board A

K： slicing knife?

L： protecting cover?of the slicing knife

M：protecting ring of the slicing knife?

N：food pressing stick of model 300

O：protecting cover?of the grinding wheel?

P：handle of the grinding wheel

Q：position fixing screw of the grinding wheel

R： position fixing screw of the food stopping board

S： position fixing screw of the protecting cover?of the slicing knife

T： wire and plug

U： plastic feet

Notice and Safety Rules

※ If this product was broken or it caused an accident by being used incorrectly, the manufacturer will not take any responsibilities.
※ please do not uninstall or change any important parts of this product, such as the axle of the slicing knife and the electrical parts.
※ Prohibit using this product to cut food that was frozen or with bones. Prohibit using this product to cut fish or any other articles that do not belong to food kind.
※ Regularly check the wire and the plug, make sure they are in good condition and safe enough. Obey electricity using rules. Prohibit using this product when the insulation parts were broken.
※ Make sure the grounding wire of the product is connected well. Prohibit using this product when you are unshod or your hands are wet.
※ When cleaning the product, please do not wash it by water directly, do not dip the product in water.
※ When using the meat slicer, you must make sure that the protecting covers are installed well. Prohibit touching the slicing knife and other moving parts. Prohibit standing at the direction that the slicing knife is running toward.
※ The slicing knife may not run because the knife supporting pan was locked or there was something wrong with this product. In that case, please cut off the electric power first, and then repair and maintain it.
※ If the food carrier or the food pressing board work hindered, please clean the slip axle, and add some 30# lubricating oil or edible oil onto it.
※ When the strap works not so good, please check whether the screws at the button of the base are tight enough or not, or check whether the strap is too loose or not. If so, please tighten the screws or adjust the degree of tightness of the strap.
※ If the meat slicer will not be used for a long time, please cut off the electric power. Please pay attention to keeping the product away from water and dampness.
※ When the point of a knife of the razor blade with protect the cleft of the knife wreath big in 5 mms, needing to replace the new razor blade.
※ Please don't touch the not operator machine or power line etc.. If this machine's outside wire or cable is broken, it should be changed by the manufacturer, manufacturer's agents or someone who is qualified to do that. This is to avoid dangers.
※Children and without civil capacity or with limited capacity for civil conduct of the person are prohibited from playing in the near the machine, in order to avoid danger.

Product Display

Item Number: 020250

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.