110V,310r/m,850W,15mm Blade Meet Slicer

新建网页 1 新建网页 1

15mm Meat Slicing Machine 110V 850W

Introduction This product can be cut, shred, integration design is fast and convenient, easy to clean (can use water flush the machine directly).
Features 1 Stainless steel blade 2 Stainless steel knife comb 3 It can be washed directly 4 Solid base 5 Integrated switch
Voltage	110V
Power	850W
Rotation rate	310r/min
Package Size	393737cm(15.3514.5614.56'')
Size of feed port	7cm*11cm
Weight	18.6kg(41lb)
Blade	15mm
			Easy to wash, say goodbye to the trouble of washing Turn off the power supply, open the lid, rinse with water Note: do not soak the whole machine in water to clean, lest motor water, machine failure
1.【Raise the protection port】 High protection mouth, more convenient and safe to put meat
			2.【Stainless steel knife】 High protection mouth, more convenient and safe to put meat
3.【Non-slip feet】 Stabilize the machine and prevent it from slipping when working
			4.【Stainless steel handle】 Humanized design, more convenient handling
5.【Switch】 It can prevent the motor from being touched when cleaning
Produc Display

Operations
1. Uses and features This product can cut pork, mutton, beef and other meat, the meat cutting thickness is moderate. The product has the characteristics of compact structure, balance, luxury, safety, reliability, high efficiency, simple operation and so on. 2. Matters needing attention ☆Meat idle time can not exceed 2 minutes, to prevent the blade edge friction heat burn. ☆When starting work, it is strictly prohibited to hand out the feed inlet and outlet. ☆Handling and cleaning blades need to be careful to prevent accidental injuries. ☆Cleaning and maintenance must be cut off the power supply, it is strictly prohibited to use water spray pipe to clean the machine 3. Usage method (1) Prior to use should check the power supply, the voltage is in line with the requirements, the power supply socket should be equipped with a reliable grounding. (2) Prior to the use of a comprehensive cleaning, remove the top cover, remove the knife comb, with hot water to clean the parts. (3) The meat should be meat in addition to skin and bone, cut into strips, the size should be less than the inlet. The first feed into meat, second feeding into shredded meat, third feed into meat grain. (4) Must be cleaned after use, to avoid the breeding of bacteria. Cleaning methods in accordance with （2）, after cleaning, in the knife on the coated with appropriate cooking oil. 4. Daily maintenance (1) After each use, must be cleaned in meat and meat parts, while the body scrub. And the knife is coated with edible oil to prevent the blade from rust. (2) Often check the power cord is damaged, so as to avoid leakage wounding. (3) Not stored in a long dry place, so as not to rust parts.

attention	1. Do not put the following food into the machine: hard fruits, bone-in meat, frozen meat, otherwise it will damage the blade easily and jam the machine. 2. If you need to cut hard fruits, please first tear them into pieces by hand, and then put the pieces into the machine to cut into shreds.
Maintenance steps
After cleaning, dry the water, add cooking oil, and use a brush to sweep the blade，turning it on for a few turns can prevent rust from appearing. Due to the oxidation of the ambient air, the blades may rust, which is a normal phenomenon. Please don't worry, pour in cooking oil, add a few slices of vegetables and cut them for a few turns.
Item included: 15mm Meat Slicing Machine 110V 850W (020424)
	Item	Description		QTY	Unit
	020424	15mm Meat Slicing Machine 110V 850W		1	set