1. Machine should be placed in dry, clean, ventilated position, the
operation of the machine placed in a horizontal position and smooth. Keep
away from flammables and explosives.
2. For safety reasons, must be connected to a reliable safety grounding
device must have three feet with ground connection.
3. The heating process leads to high temperature, so avoid contacting the
heating area with fingers or skin.
4. Unplug
the power cable/cord, if the machine will not be used in a long time.
5. Please note that the cooling water temperature should not exceed 40 ℃.
Description
The acrylic bending machine heater is the core part of
bending machine. You can assemble various kinds of ideal
practical acrylic bender with this heater. •
Processing Material: Acrylic, Plastic, PVC, Plexiglass.
•
Used for: This acrylic bending machine heater can be widely used in
decoration engineering, sign making, display cabinet,
aquarium wrapping, lighting LED channel letter, bending the
supermarket shelves, curtain wall, large light box, acrylic
plates and plastic plates. •
The acrylic bending machine heater can bend all kinds of
plastic sheet. If the thickness of acrylic sheet is beyond
6mm, you can use two heaters heat the top and bottom of the
sheet at the same time, or you need to cut a slot on the
sheet. •
You can also use many acrylic bender heaters to heat more
bents at the same time.
Parameter
Voltage
110V
Frequency
50/60Hz
Power
300W/800W/1500W/2000W
Maximum Bending Width
12in(300mm)24in.(600mm)48in(1220mm)71in(1800mm)
Heating Thickness
0.04" – 0.24" (1mm - 6mm)
Package Type
Cardboard Box
Feature & Advantage
• Reasonable design, small size, compact structure
and beautiful appearance. • Heat even and temperature adjustable. • With circulating cooling water system on both sides of heating pipe. • Power supply joint and water pipe joint are at the same end. • The body is made of special aluminum extrusions.
• Portable, small
occupation, low consumption and reliable operation. • Light and practical with low cost, value-priced. • Circulating cooling water system can make sure other parts (no heating is
required) won't get thermal deformation. • Free plugging and unplugging, easy to storage and assembles to worktable very
conveniently.
Recommended
temperature for some regular materials:
Acrylic: 210℃
Perspex: 195℃
PVC sheet: 155℃
ABS: 190℃
PET: 160℃
NOTE: Just for reference,
and users may modify them according to their materials and working habits.
