|
New Emulsion Pump
High Shear Emulsifying Pump 110V 2.2KW |
|
|
|
|
|
|
.jpg) |
|
Product
Overwiew |
|
The High Shear Emulsifying Pump is an efficient emulsifying device, is
mainly used for continuous and professional production and is suitable
for various industrial fields with fine emulsification requirements. The
device can achieve uniform dispersion and emulsification of materials,
is small in size, simple in structure, high in efficiency, easy to
operate and long in service life, and can be widely applied to the
fields of biological medicine, food, cosmetic care, ink coating,
nano-materials, petrochemical, printing and dyeing auxiliaries, paper
making, pesticides and chemical fertilizers, plastics, rubber and other
fine chemical mixing, dispersion and emulsification. |
|
Product
Parameters |
| Power |
2.2KW |
| Voltage |
110V |
| Frequency |
60HZ |
| Speed |
2900r/min |
| Flow range |
0-3m3/h |
| N-d |
φ4-16mm |
| Inlet |
38mm |
| Outlet |
32mm |
| Material |
stainless steel 304
|
|
 |
|
Product
Features |
.jpg) |
Stainless Steel Material
- Food-grade stainless
steel
- Reach the food hygiene
level
- Surface polishing
treatment
- Rust and corrosion
resistance
|
|
|
.jpg) |
Premium Pump Head
- Adopt precise machining
- Without liquid residues
- Detachable pump head
design
- Convenient to disassemble
and clean
|
|
|
.jpg) |
Protective Cover
- Wrap and protect the motor
- Prevent liquid from splashing
- Not prone to rusting and corrosion
- Prolong the service life of the motor
|
|
|
.jpg) |
Inlets
and Outlets
- Inlets and outlets with
different functions
- Ensure smooth circulation
of liquid
- Adopt clamp connection
and fixing
- Flexible to fix and
loosen
|
|
|
 |
|
Attention |
|
1. Check whether the inlet seal
and the outlet seal are good, and no impurities, metal chips and other
materials that can cause damage to the equipment enter the body. |
|
2. Check whether the motor and
the machine are in good conditions when the machine is transported to
leave the warehouse. When the power switch is connected, a safe contact
motor device should be installed. |
|
3. Before inlet and outlet
process pipelines are connected, the process pipelines are cleaned, and
it is ensured that the process pipelines are free of welding slag, metal
chips, glass chips, quartz sand and other things which can cause damage
to the equipment, and the process pipelines can be connected with the
machine after being connected with the hard materials. |
|
4. The installation position of
the TRL1 pipeline equipment and the nearest location of the container
can be selected such as the bottom of the container. The pipeline must
be simple and direct, and the components of the elbow pipe are reduced
as many as possible, thus reducing the resistance of the material in the
circulation process. |
|
5. The choice of location for intermittent equipment
installation is suitable for the vertical level of container. When the
machine topples over, it must be well sealed, moisture-proof, dust-proof
and explosion-proof. |
|
6. Before starting the machine,
rotate the spindle, feel the height and flexibility with two hands, and
determine no other frictional sound and abnormal sound. |
|
7. When the pipelines are
installed, the inlet and outlet pipes adopt the hoop electric connection
structure. |
|
8. After the above work is
finished, the power supply is connected, and the steering shaft of the
motor is checked repeatedly. |
|
Maintenance |
|
1. The cooling water is usually
connected before the machine is started, and the cooling water is closed
and then can be used. |
|
2. The cooling water pressure is
less than 0.2Mpa. |
|
3. The material must enter the
working chamber, and the machine can be switched on. It is also
necessary to ensure that it does not run in the condition of material
failure, so that idling and mechanical sealing are avoided. (A current
protector is added when the emulsion pump is connected, so that burnout
or the bad influence on the service life is avoided.) |
|
4. A current protector is added
when the emulsion pump is connected. |
|
Important Note |
|
After the sealing
of the cooling water is confirmed, the motor is started, and the motor
steering should be operated according to the steering sign of the main
shaft, and the reversal is strictly prohibited! |
|
It cannot be Idle
and Reverse!!!!! (You must pay attention to it.) |
|
Product
Display |
.jpg) |
.jpg) |
.jpg) |
|
|
|
|
Item Number (022709): 1 * New
Emulsion Pump High Shear Emulsifying Pump 110V 2.2KW |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
