|
|
|
Portable Electric Hinge Drill With
Self Stop |
|
|
|
|
|
|
|
NOTE：Confirm
drill hole size before purchase. |
 |
 |
Description:
This machine is mainly
used for drilling processing of
cabinets, wardrobes, door processing and manufacturing, and
can adjust the drilling position vertically and horizontally,
which is convenient and fast, and the switch control is
accurate and in place.
One - time completion of hinge hinge hole and screw holes on
both sides of the hole, greatly improve the work efficiency.
This machine adopts pure copper motor, high quality drilling
package, thickened iron body, thickened waterproof working
surface. The compact body is easy to carry, is a good helper
of home decoration.
The machine has added the function of automatic start and
stop, through the contact switch installed inside the
machine, the main switch of the machine is opened, and the
drill will start to rotate when the working handle is pressed. |
 |
 |
|
Voltage: |
110V |
| Power: |
1100W |
|
Punching Depth: |
0-40mm |
| Speed: |
2840r/min |
| Drill: |
φ35mm*1,φ8mm*2 |
|
Combined Drill Model: |
45-9.5 |
| Scale： |
19.6″(50cm) |
|
 |
 |
 |
 |
Advantage:
1.Portable hinge
drilling machine, small body, easy to carry
and move.
2.Thickened and enlarged table, easy to use, ensure success
rate.
3.High quality combination drill, drill bit can be changed at
any time.
4.Air spring rubber compression device to easily secure the
board.
5.The scale control is accurate to reduce the error rate.
6.Adjust the position of the positioning baffle at will
according to the scale as needed.
7.High-strength spring, thickened material, not easy to
deform.
8.Built-in contact switch, when the working handle is pressed
down, the drill begins to rotate. |
|
|
|
Precautions
For Use：
1.Before operation, check whether the power cable is properly
connected, whether the protective device and the pressing
device
are complete, and whether the components are normal.
2.The operating position
should be bright and without shadow.
3.The drill should be
centered, balanced and sharp.
4.This machine is mainly
used for wood punching processing
(thin aluminum can also be), and the selection of materials
can not have nails, screws and other tools damaged or blunt
foreign bodies.
5.Hands should not touch
the rotating parts of the machine
tool during operation, and the wood chips should not be
removed during operation. The power supply must be cut off
before adjusting or removing the wood chips, and can only be
carried out after the machine tool stops working.
6.Stop the machine
immediately if anything abnormal is found. |
|
|
|
Item Number: Portable electric
hinge drill 027353 |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from
us with low cost. |
|
