|
|
新建网页 1
新建网页 1
|
WM210V Inch
Precision Metal Bench Lathe 8"*32" 900W |
| Miniature lathe is mainly used for
processing the end face of various rotary surfaces and rotating
bodies.For example, turning inside and outside cylindrical surface, cone
surface, ring groove and forming turning surface, turning end face and
all kinds of commonly used metric thread, cone surface, ring groove and
forming turning surface, turning end face and all kinds of commonly used
metric thread. |
| Motor: |
110V brushless motor |
| Voltage: |
AC110V 50/60Hz |
| Power: |
900W |
| Length of center: |
31.5"(800mm) |
| Swing Over Bed: |
8.3"(210mm) |
| Rotary diameter of tool
rest: |
5.51"(140mm) |
| Spindle bore: |
1.50"(38mm) |
| Diameter of chuck: |
4.92"(125mm) |
| Width of lathe bed: |
3.94"(100mm) |
| Number of Spindle
Speeds: |
Infinitely variable
speeds |
| Spindle taper: |
MT5 |
| Knife rest labour: |
Horizontal four-station |
| Spindle rotation speed: |
50-2500rpm |
| Range of Inch
Threads(optional accessory ): |
10-44T.P.I |
| Precision of the
spindle: |
0.01mm |
| Automatic feed range: |
0.1mm-0.2mm |
| Maximum stroke of tool
rest plate: |
2.16"(55mm) |
| Maximum stroke of
middle plate: |
2.95"(75mm) |
| Maximum stroke of
bottom plate: |
26.8"(680mm) |
| Maximum stroke of
tailstock sleeve: |
2.36"(60mm) |
| Tail frame taper: |
MT2 |
| Lathe sizes: |
45.7"*13.0"*13.4"(116*33*34cm) |
| Package size: |
49.2"*18.9"*17.7"(125*48*45cm) |
| Gross weight: |
183lb(83kg) |
|
Note:*We provide optional
parts for this lathe. If you need, please contact us*. |
| Product Features & Advantages |
- High quality cast iron bed after
high frequency quenching process and precision grinding
- The spindle rotation speed is divided into two levels in the range of
50-2500rpm, which can be adjusted continuously
- Brushless motor has strong power, low noise and saves energy
consumption
- High precision spindle, high quality bearing, high accuracy, wear
resistance, long life
- With one button start and stop switch and forward and reverse switch |
| Product Presentation & Details |
| WM210V lathe * 1
|
Chuck Jaw * 3 |
The Screwdriver * 2 |
| Open spanner *2 |
Hexagon Wrench *5 |
Chuck Spanner *1 |
| Oil can * 1 |
Oil pan * 1 |
Gear *11
(75/72/70/66/60/60/52/50/48/40/30) |
| The Fuse * 1 |
English Instruction
Manual *1 |
|
|
