|
|
新建网页 1
|
Electromagnetic
Vibrating Feeder Shaking Feeding Machine 110V/220V |
| Micro electromagnetic vibrating feeder
is widely used in various industries such as light industry,
chemical industry, food, food, grinding, etc. It is used in the
feeding, batching and quantitative automatic packaging of powder
and granular materials, and can realize the production process.
centralized control and automatic control. |
| Need to know before
buying!! |
①This machine can use
both 110V single-phase power supply and 220V single-phase power
supply.
②In the case of 220V power supply, the material handling
efficiency of the machine is about twice that of 110V power
supply.
③The controller must be set to E50 to work properly, please do
not set to E100!
④Be sure to install the four rubber foot pads before use,
otherwise it will affect the efficiency of material handling. |
| Model: |
GZV-3 |
| Voltage: |
Both AC110V and AC220V
are available |
| Power: |
30W |
| Production capacity: |
About a ton per
hour(220V voltage condition) |
| Vibration frequency: |
3000/3600 beats per
minute(Low and high frequency) |
| Amplitude: |
0.06"(1.5mm) |
| Package size: |
21.3"*6.3"*11.0"(54cm*16cm*28cm) |
| Net weight/Gross weight: |
27.8LB(12.6kg)/28.9LB(13.1kg) |
|
The
dimensions of other models are as shown in the picture below, if
you need other models, please contact us. |
| Product Features & Advantages |
 |
Thicken the Base
The base has been
thickened
and weighted, and the design
is scientific and reasonable to
ensure the stability of the center
of gravity during work, without
deviation
|
|
Shock Absorber
The two shock
absorbers before
and after the machine are made
of thickened resin, with good
elasticity and toughness, not easy
to break, and long service life
|
 |
 |
Rubber Mat
The bottom of the
machine has 4
rubber mats. With good anti-slip,
slow shock, corrosion resistance
and other functions, stable support,
can prevent the machine from
working deviation
|
|
Feeding Chute
15.7”x
3.1”oversized feeding
trough, made of thickened 201
stainless steel, scientific and
reasonable structure, uniform
feeding and low loss.high working
efficiency
|
 |
 |
Electromagnet
The electromagnet
adopts high-
quality silicon steel sheet and pure
copper coil, adopts resonance
principle, low power consumption,
durable and high feeding accuracy
|
|
Control Unit
The control unit
has two gears of
high frequency and low frequency,
which is easy to operate and can be fixed to the wall; made of
aluminum alloy, light weight; with short circuit protection
|
 |
- Small size, light weight, reasonable
center of gravity, simple structure, convenient installation and
maintenance.
- The material flow can be changed and opened and closed
instantaneously, so the feeding precision is high.
- Using the resonance principle, the double mass works in a low
critical near-resonance state, so the power consumption is low.
- Using thyristor half-wave rectifier circuit, the feeding
amount can be adjusted steplessly.
- Since the material in the feeding trough is in a jumping
motion, the wear on the feeding trough is very small.
- This series of feeders are not suitable for materials above
300°C and places with explosion-proof requirements. |
| Product Presentation & Details |
| GZV-3 feeding machine *1 |
Control unit *1 |
Power cord *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
