|
|
新建网页 1
新建网页 1
|
Spindle Motor 220V
4.5KW(Flanged) |
| Spindle motor has the advantages of fast speed,
small volume, lightweight, low material consumption, low noise, low
vibration.It is widely used in wood, aluminum, metal, stone, metal,
plastic and other materials carving processing, widely used in many
industries, can greatly improve the processing quality and accuracy. |
| Voltage: |
220V |
| Power: |
4.5kw(6HP) |
| Current: |
20.45A |
| Operating Frequency: |
300Hz |
| Collet Nut: |
ER32 |
| Clamping Range: |
0.118"-0.787"(3mm-20mm)[Standard
with 6mm collet, if you need other sizes please contact us] |
| Clamping Diameter of Collet: |
0.236"(6mm) |
| Motor Speed: |
18000rpm |
| Cone Hole Beat: |
2UM |
| Cooling Mode: |
Fan Cooling |
| Lubrication Mode: |
Grease Lubrication |
| Fuselage Material: |
Pure Aluminium |
| Product Size: |
14.8"*5.4"*6.1"(37.5cm*13.7cm*15.5cm) |
| Net weight: |
29.1LB(13.2kg) |
|
NOTE:
Spindle motor must be equipped with frequency converter.Set up frequency
converter correctly according to machine requirement. The item is not
included frequency converter. |
| Product Number |
Voltage |
Power |
Nut Type |
Clamping Range |
| 053290 |
220V |
2.2kw |
ER25 |
1mm-16mm |
| 053289 |
220V |
3.5kw |
ER20 |
1mm-13mm |
| 053288 |
220V |
4.5kw |
ER32 |
3mm-20mm |
| 053149 |
220V |
6.0kw |
ER32 |
3mm-20mm |
| 056291 |
220V |
7.5kw |
ER32 |
3mm-20mm |
| Product Features &
Advantages |
- Through the inverter to adjust the output
voltage and frequency can be achieved 0-18000 stepless.
- High precision bearing and pure copper coil, high machining accuracy,
long service life.
- Pure aluminum body, anti-oxidation and anti-corrosion, lighter weight.
- Adopt precision steel ball holder to ensure spindle rotation accuracy
in high speed grinding.
- Lubricating grease resistant to high temperature of 200℃, low noise. |
- must match the drive spindle chosen correctly
according to the electric spindle nameplate good debugging power,
voltage and frequency.
- Set the frequency converter should be set command channel, and then
set the display channel, and finally set the parameters. When setting
parameters, be sure that the reference frequency, the frequency of the
three highest rated frequency and consistency.
- The spindle is generally clockwise in the wrong direction, the drive
can change settings or swap any two rotating wire the inverter output
UVW terminal on.
- In general, water-cooled spindle surface temperature and ambient
temperature greater than 20 degrees, the heat can be considered a
spindle; when air-cooled spindle surface temperature greater than
ambient temperature of 30 degrees, can be identified as the main heat
seriously, immediately shut down cooling, a check. |
| Product Presentation &
Details |
| Spindle Motor *1 |
Fork Wrench *1 |
Collet Wrench *1 |
|
