|
|
新建网页 1
新建网页 1
|
25mm Electric Rebar
Bending Bender 110V |
| The rebar bender machine can bend 1/4''(#2) to
1"(#8) (6 to 25 mm) rebar to 0-180°in 6-7 seconds. Two standard foot
pedal control switches for hands-free bending.It is widely used in
construction engineering, used to bend round steel, rebar, screw and so
on, the machine can be batch operation.Built-in safety device can stop
operation immediately. |
| Model: |
RB-25 |
| Voltage: |
AC110V 50/60Hz |
| Power: |
1700W |
| Bending Angle: |
0-180° |
| Max.Rebar Diameter: |
0.98"(25mm #8 Grade 60) |
| Min.Rebar Diameter: |
0.24"(6mm #2 Grade 60) |
| Bending Speed: |
6-7 Seconds |
| Max.Rebar Hardness: |
HRC30 |
| Bending Radius: |
1.53"(39mm) |
| Gyre idler wheel diameter: |
3.70"(94mm) |
| Noise: |
92db |
| Shell Material: |
Iron |
| Amps: |
14A |
| Product size: |
17.9"*20.5"*17.5"(45.5cm*52cm*44.5cm) |
| Net weight: |
200.6lb(91kg) |
| Gross weight: |
284lb(129kg) |
| NOTE:When bending processing, the angle of point 1 must be bigger than
point 2. Otherwise, the machine can not operate normally. |
| Product Features &
Advantages |
- 1700W high-power pure copper coil motor,
smooth operation, low noise, long life, higher work efficiency.
- Ultra-Fast bending speed, can complete a steel bar bending in 6-7
seconds, save time.
- The bar bender machine adopts a sturdy iron machine body and durable
Idler Wheel. Moreover, it can stand super-hard rebar with strong
clamping force, which can help to reduce steel rebar waste.
- This rod bending machine has two slide-type angle selectors, which can
help you accurately bend any angle from 0-180 degrees. Preset angle
locks are designed for repeating the same angle bending.
- Foot switch design, convenient and efficient bending. With four
handles on the corner for you to transport and operate effortlessly. |
| Product Presentation &
Details |
| Rebar bending machine *1 |
Foot switch *2 |
English instruction manual *1 |
|
