|
|
Product Overview
|
Dental High
Speed Cutting Machine Polishing Machine |
| Dental high-speed cutting machine is
one of the professional dental equipment, this equipment by the
transmission mechanism, special fixture, frame, protection
plate, dust, lighting and electric control and other parts of
the composition, is the metal parts can be quickly cut
professional equipment, but also grinding, polishing and other
operations. |
| Voltage: |
110V/60hz |
| Frequency: |
370W |
| Head
rotational speed: |
> 20000rpm/min |
| Product
size: |
10.6"*13"*12.6"(27CM*33CM*32CM) |
| Package
size: |
15.7"*13.4"*15"(40CM*34CM*38CM) |
| Net
weight/Gross weight: |
44lbs(20kg)/48.5lbs(22kg) |
| Product Features & Advantages |
 |
1. Durable :
The high-power motor is
made of pure copper core, strong power, high speed, low
noise, and can be used for a long time.
|
2.Easy to move :
Small size, light weight,
easy to move, you can move at any time to the place where
you need to use.
|
 |
|
 |
3.Protection design
:
The machine is designed
with a protective plate, which plays a protective role
during operation. Do not remove the protective plate for
operation.
|
4.Multi-functional :
A variety of functions are
integrated, with cutting, grinding and polishing functions.
Start and close through the switch, simple operation, easy
to use.
|
 |
|
 |
5.Lighting design :
The machine has its own
lighting system to provide more light and better visibility
during operation.
|
 |
Installation:
The machine should be placed on
a stable operating table, which can properly absorb shock and
eliminate sound. The power plug should be matched with the
socket, and the ground should be reliable.
Operating points :
1. The metal part of the
machine should be firmly grounded.
2. Park the clutch handle
of the special fixture in the vertical position of the
special fixture, and the elastic clamp head (four claws)
extends out of the special fixture (that is, the friction
clutch is in the release position).
3. Activate the lighting
button and select the appropriate lighting position.
4. Start the "Work" button
and check the rotation direction of the spindle (towards the
internal operator).
5. Install the grip of the
clamping tool and turn the clutch handle to the clamping
position of the spring clamping head.
6. When the special fixture
spindle is in the rotating state, the installation and
removal of the grinding tool clamp can be carried out by
rotating the clutch handle.
|
 |
|
 |
Safety Information :
1. The protection grounding
of the machine should be solid.
2. When the spindle is
rotating, if there is an abnormal sound, it should be
stopped and checked immediately, and it can continue to work
after the fault is removed.
3. When cutting, grinding
and polishing, do not exert too much force.
4. When operating, the
protection plate should be stopped in a safe position. Do
not remove the guard plate for operation.
5. Clean up the accumulated
material in front of and inside the suction port.
6. When the spindle of the
head is found to turn, the tightness of the rotating belt
should be adjusted in time or the belt should be replaced.
Adjusting the tightness of the belt can be adjusted by
loosening the screws of the special clamp seat; The
belt can be replaced by removing the belt safety cover.
Remember that the fastening screw should be fastened
reliably and the position should be accurate.
Attention :
Do not start the motor when there
is no gripping stone holding pin in the head, otherwise the head will be damaged
in a short time.
Before the new head is used, it needs to be idled for 20
minutes, and there should be a gripping stone holding pin on
the head when idling, before it can be used normally.
|
 |
|
Product Presentation & Details |
| Dental high-speed cutting machine*1
Hex wrench*2 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
