Sign in or register

My Eezglobal

My shopping cart

Packaging Supply> Filling Machine>
070583:Liquid Filling Machine 110V

Similar products

181036:1000Pcs 44MM Laminated Plastic Foil Bottle Cap Liners

181037:55MM1000 Qty Laminated Plastic Foil Bottle Cap Liners

188031:Stainless Steel Filter Press Filter Slag Machine

160439:10-300ml Paste Liquid Heating Stirring Filling Machine

023019:110V High Temperature Stand-up Filling Machine

新建网页 1

Liquid Filling Machine

Numerical control liquid filling machine uses micro-computer to control the mini-pump on filling time and the rotation motor so that the machine can fill the liquid fluently and at high accuracy. It's widely used in medical , chemistry, food, beverage, oil and cosmetics, etc. It's suitable for filling low-viscous liquid without pellets.

Separated with the electric motor, the pump is made of a variety of anti-corrosion material. There is no mechanical metal part or abrasion inside the pump. The pump can stand the oil, heat, acid, alkali, abrasion and chemical products. This pump integrates the advantage of self-suck pump and chemical pump, so it can self suck, heat protect, stable working and continuous idle or load operate for long time.



1.High quality single-chip control, high efficiency, low power consumption.
2.Automatic counting, control the filling quantity effectively.
3.LCD display, touch screen panel is easy to operate.
4.High filling accuracy, precise volume.
5.Stable and long use life on product working performance.
6.Self-suck function, don't need to pour.
7.Pump can stand the acid and alkali.
8.Anti-dripping design.
9.Reasonable construction design, stainless steel shell is strong and durable to use.

Technical parameters:
Voltage: 110V
Power: 30W
Max flow rate: 3.2L/min
Max suck distance: 2 meters
Repeat error: <0.5%
Filling volume range: 2ml-3500ml
Anti-dripping function: Available
Memory function without electricity: Available
Filling tube material: Soft silicone tube
Filling nozzle diameter: Φ8mm
Speed parameter range: 1-9
Filling time range: 0.01-99.99s
Interval time range: 0.01-99.99s
Weight: 5.5kg
Machine size: 350*270*150(mm)
Package size: 400*380*200(mm)
Warranty: 1 year warranty on machine


Installation and operation
1)Take the small filter (photo 1) out of the part, and install it below the feeding tube. Then take the plastic filling nozzle out and install it in the feeding tube (the triangle head connects the discharge tube). Take out the filling- head stand and install it on the left of the machine as photo 3 shows, put the filling head in the clip and tighten it by socket wrench. Connect the pedal switch with machine, and put the tube with filter below the liquid level inside the storage tank. The position of tank should be lower than the machine. Start to test the machine after all is ready. (The filter should be installed for the intake, the pump should not contain impurities or the pump will be blocked and the pressure will be not enough for water to come out.)
2)Turn on the switch, the LCD screen will show welcome words and the machine will be under standby status after 3 seconds, (if the machine is under working status, other buttons can't work, you need adjust the parameter after press the “on/off” button to let the machine under pause status.) then press “program-option” button, you can choose from 0-6. Choose program 0, you can set the parameter by the four parameter-set keys. If you choose program 1-6, you should long press the parameter-set key, you can't set parameter until the shining cursor appears. Press the "parameter-set" key to save the parameter after you finish the setting. Different filling volume choose different program. As the machine can automatically memorize the parameter, you don't need to repeat the setting.
Speed parameter range:1-9
Filling time range:0.01-99.99s
Interval time range:0.01-99.99s

There are inching and automatic filling, you can press the "Inching/Continuous" key to exchange. You need to install a pedal switch if you choose the inching way, every filling needs to press the pedal switch, and the interval time is useless.

3)Measurement proofreading
Press "On/Off" button, the machine is under working status (light on), you can hear the water pump is running, and observe if there's water coming out from the nozzle. If the water can't come out for long time, you can dismantle the nozzle and install it again after the water coming out. If you choose the inching way for measurement proofreading, you can use measuring glass or electronic scale to continuously adjust the filling time and speed to meet the requirement. The normal work can be carried out after the measurement proofreading is done.

This package included (070583):

1 set Liquid Filling Machine 110V with components & tools


About Us Product Service Shipping Payment Privacy refund Warranty

Copyright All Rights Reserved