|
|
新建网页 1
|
Full-automatic Double-position Heat Transfer Printing Machin(Pneumatic) |
|
This Pneumatic Double Table Heat press
machine is featured by its two working tables and air automatic
working system. The upper heating board
moves automatically and easily. It is very efficient for advertising
use and industry use. Heating panel and
working tables are specially processed and make the machine
works well and tranfer images clearly.
It's suitable for sublimation and heat
transfer printing work. |
 |
|
Parameter |
|
Items |
Double-position Heat Transfer
Printing Machine(Pneumatic) |
|
Printing Area(mm) |
400*500mm(15.7*19.7inch) |
|
Temp.range |
0-260°C |
|
Time Range（s） |
0-999 |
|
Votage/Power |
110V/2.5KW |
|
G.W.(kgs) |
228KG（502lbs） |
|
Machine Dimensions(mm) |
1100*700*550(44*27.5*21.6inch) |
|
Packing Size (mm) |
125*86.7*148.5(49.2*34.1*58.5inch) |
|
|
Feature |
|
1.High quality as well as good price, good after-sale
service.
2.The machine adopted
automatic
pneumatic fitting pressure, it can transfer the lower pressure to higher
compress pressure. (pressure up to 8kg/cm2).
3.It
contains two locations, paralleled moving the head up left and right,
much more convenient and faster,
high efficiency ,save labor and time at one time.
4.This machine adopts thicken heat plate to ensure the
temperature more equality and steady as to
improve the transfer quality and avoids tolerance.
high accuracy, perfect heat press effect.
5.Upgraded
lower platen allows room for T-shirts to be easily, placed into and
removed from machine,
10cm adjustable range,
produce wider products.
6.The
pressure can be adjusted according to the thickness of the material
you're transfering to. Including
print the ready made clothes and cut pieces ,it can be
widely used in the factory mass-production and
personalized pyrograph of retail shops. |
 |
 |
 |
|
1.Power switch key: turn off the machine
power when flipping left, turn on the machine power when
flippingright.
2.Emergency stop key: When pressing
this key, the heating plate stops pressing, and the heating plate
canpress normally when it springs up.
3.Start key: When pressed, the heating plate will start the heating plate action according to the set mode.
4.Temperature control table:Press to set the temperature, press to adjust the value, and press
again to
confirm the temperature.
5.Automatic semi-automatic
switch:Automatic press mode, press the start key once, the heating
platerepeated left and right action
and press down. Semi-automatic push down mode, press the start key
once,heat plate action and push
down once.
6.Pressing time: the heating plate
can be set a single pressing time.
7.Reset: can clear the produced
quantity value.
8.Adjustment operation: Enter the
adjustment interface first press the "motor brake" key, turn
greenbackground can be controlled
by the other three keys to move the heating plate to the left, to
the right
tomove a single press work.
|
 |
|
Operation procedures |
|
Please
note: Users should operate the machine with ground wire connected for
safety!
1.Plug in, turn on the power switch, the power indicator
lightened.
2.Set the thermostat to the temperature needed (Normally
120-200ºC),set the timer to the needed. (Normally 5~20Second),then wait
for until the temperature has reached the preset temperature.
3.Put
the cloth on the silicone pad of the working table,
cover the printing paper (please note the right
surface of the paper).
4.Press the start switch, you will see the machine is
working and the time is counting down
.
5.When the time come down to over,
the heating plate will raise automatically.
you will find the beautiful
and attractive effect!
6.If it is cold-ripping of the transfer paper, please use
blackboard wiper to rub against the whole transfer paper, wait for 5-10
seconds, then rip off the transfer paper. If it is the hot-ripping of
the transfer paper,
you can rip off immediately after printing. |
|
Please
note:successful print requires right time,temperature and pressure,the
thickness of the
clothes material
,even thetype of printing paper,all will affect the performance of
printing .Any
kind of
sublimation paper need test before mass production. |
|
Item Number: 110162 |
|
|
You can make
order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost. |
|
