Extrusion Coating and lamination are industrial processes that enable to
produce a melt of thermoplastic polymer material.
When it is coated as a thin layer onto a moving substrate, the process
is known as “Extrusion Coating”. When it is used as a “glue” to combine
substrates, it is known as “Extrusion Lamination”.
Coating use chemical liquid
film. With this machine, UV coating liquid will adhesive evenly on photos.
When protect film becomes dry by UV light, photos become waterproof ,damp-proof,
anti-aging, anti-ultraviolet,
strongly adhesive, hand wearing and anti-scrapping.
The greatest advantage is that the UV coating machine can save a lot of money,
the thickness of
coating is slight, no need more UV coating liquid and it is not prone to fail
such as cold laminating,
and more transparent than cold and hot laminating. Specially suitable for photo
studios to use,
due to bulk laminating . It will replace the traditional cold and hot laminating
techniques to a great
extent.
Film liquid can be recycled, and the cost is only 1/10 of the cold Laminator.
Cost savings, there are no-clean unit, clean, and UV protection, waterproof,keep
the pictures do not fade, can't afford to indentation
drum, not deformation, refined aesthetic appearance. Widely used in digital
imaging, studios, color photocopying laser printing, graphic output, digital
printing
and other industries.
Parameters:
Coating Speed
39"(1m)/Per
minute
Max Coating
Width
13"
(
330mm)
Coating
Thickness:
0.3oz/10ft2 (8g/m²)
Coating Cost
US$0.02/Per
Letter or A4 size paper
Power
Consumption
1200W
Power Supply
220V 50HZ
If you are using a 110V power,
contact us for a adaptor
Lamp Span Life
800 Hours
Gross Machine Weight
88Lb (40kg)
Machine Dimensions:
23x21x17" (600mm×550mm×440mm)
Features:
It is convenient ,safe, cheap and energy-saving, and
less UV harmless.
High transparency,20% improvement on the cold
laminating.
Circulate film liquid, save cost.
Low laminating cost, only 1/10 of cold laminating.
Compact covering, no air bubble at all.
Even
convey, laminating.
Unique convey chains ,no harm laminating surface.
Works
cleanly, no need much maintenance.
Easy
changing UV tube and other parts.
This
extrusion coater is specially made for beautiful and protecting laser,
ink jet photo paper, coated paper,back
adhesive paperor
other stuff after being printed. It can protect
photos, card, poster and so on from wearing, humidity, liquids, heat,
UV, fading, and enhance appearance and extend storage life. (Notice:
This machine can not coat for laser printer, but now we are developing a
new one for laser printer. To be expected.)
FAQ:
Why
this machine not fit for laser printer?
The reason: If you use such as Xerox or
Konica
Minolta digital printer, because the ink powder is too smooth to stick
by the coating liquid, so the effect is not so well. To get perfect
laminating effect, you need to pre-heat the printing paper up to 100 to 120
degrees Fahrenheit (37.8-48.9 degrees Celsius)
by some heating machine before coating, then the ink powder could stick
the coating liquid evenly, and the UV coating machine could work with
the laser printing paper.
