|
|
新建网页 1
|
Colloild Mill Grinder
JM-65 220V |
|
 |
|
General Introduction：
JM-65 series colloid mill is the scientific
research achievement of our factory that brings in Germany’s most
advanced technology materials and digestion. This machine is the
domestic original product, and the second generation of ultrafine
particles and wet processing of new machinery and equipment. Applicable
to all types of emulsion homogenization, emulsification, dispersion,
mixing, crushing, grinding, widely used in food (jam, fruit juice,
protein powder, dairy products, beverages, etc.), pharmaceuticals (all
types of syrup, nutrition, medicine , poultice, etc.), chemicals
(paints, dyes, paints, grease, oil and catalyst, etc.), as well as
emulsified asphalt, coal flotation agent, emulsion explosives and other
industries.This
machine can be used to grind peanut butter. |
 |
|
Operating Principle：
The basic working principles of colloid mill are cutting, high speed
grinding and mixing. This machine replies on two tapered tooth surfaces
in relative motion to grind. One spins at a stationary, the other keeps
static. Then enable materials between tooth surfaces get severely cut
and fiction. At the same time, they will effectively disperse, emulsify,
grind, and homogenate under the action of high-frequency vibration and
high-speed vortex.
Structure ：
JM-65 colloid mill is simple and compact, small volume,
light weight, convenient operation. It is composed of grind head part,
base transmission part and electric motor part. All parts that will
touch material are made of high quality stainless steel. Dynamic and
static grinder is the key part of this machine. According to different
characters of solid materials, the teeth of grinder are different.
Motor, according to colloid Mills require, is designed specially and
installing water retaining plate on flanged end cover of motor to
prevent leakage.
|
 |
|
 |
|
Installation：
JM-65 colloid mill runs smoothly and shake slightly, so according to
need, you can place it on a flat surface, or concrete foundations.
|
 |
 |
Technical specification：
|
The fineness of emulsion |
0.2UM |
|
The adjusting range |
1-0.02mm |
|
Production |
10-50L/h |
|
Motor Speed |
2890r/min |
|
Material of contact material |
SUS-304stainless
steel |
|
Voltage |
220V/50HZ |
|
Power |
2.2KW |
|
Packing mode |
Wooden case |
|
Installation dimensions |
860*420*700mm |
|
| Item include(160686):
Colloild Mill Grinder JM-65 220V |
|
