|
Warning
1. Before use of the product safety
grounding.
2. Cleaning may not wash with water pipe
At furnace product line is absorbing the
advantages of similar foreign
products designed with fashionable and
rational structure, convenient
operation, warming fast, uniform
temperature, energy-saving features,
apply to shopping malls, supermarkets,
cold drinks shop, snack,
higher than it places.
Installation and use of
the environment attention
1. This product should be on a smooth,
about formulating technology for
inflammable left side of 10cm and above,
should be back from
formulating technology for inflammable
(such as brick) 20cm above.
2. This equipment must be used with a
supply voltage of the power
supply voltage nameplate product line.
3. Users need to install suitable
equipment near the power switch,
fuse and leakage protection, not allowed
to switch before stacking debris,
convenient operation.
4. The use of this equipment must be safe
before grounding!
5. Boot should be checked before the
product is firmly connected
electrical components, safety grounding
reliability.
6. Replacement power lines should use the
same type cable and
professionals to replace.
7. The products connect electrical
installation and maintenance side,
should be invited to the operator’s
certificate holders electrician to install.
The method of operation
1. Temperature of product in front to
control the heating temperature,
from the need to ensure that the use of
temperature.
2. Connect power, the power switch,
light-switching power supply,
temperature control for rotating clockwise
direction, the required
temperature at the location of the
required temperature, heating time
orange bright light, this time for the
current to have the furnace,
heating began heating up when the
temperature at the required temperature,
for temperature control that automatic
temperature control with the ability to
connect power, bright orange light, the
resumption of electric heating,
the temperature rose, so repeated cycle to
ensure that the set temperature
within constant, as required to regulate
the temperature to the required
temperature calibration, the pie can be
produced at the desired result.
3. Question heating machines, after all
template at the furnace cleaning,
food oil, the good ice-cream powder
modulation add to the mold,
stamped on the mold, the timer redeployed
to the time required to
set heating time will remind you of the
time has come to open the mold,
with a wooden stick from the circle model
of the ice-cream percutaneous
vertebroplasty model cubes but after
removal,ice cream paper
has stereotypes do.
4. As in use, abnormal phenomenon, we must
immediately stop
using the troubleshooting checks may
continue to be used.
Cleaning and maintenance
1. The clean-up and maintenance, we should
cut off power to
prevent accidents from happening.
2. After a day of work available is
non-corrosive cleaning agent
wet towels, cleaning furnance power
lead-out device surface
and the surface, no direct water rinse!
Damage to electrical performance.
3. Clean process, the timely liquidation
of all template water to prevent spills..
Product Details
Item included
 |
Item Number |
Description |
QTY |
Unit |
Note |
|
220350 |
Electric mini pastry tart tartlet pie machine 110V |
1 |
PC |
|
|
