|
Before using the oven,
please carefully read the instructions to ensure safety.
（1）Be sure to use the household
bottled liquefied petroleum gas and the national standard
low pressure valve. Do not use the middle pressure valve. The
rated pressure of the gas is 2.8kPa.
（2）After the connection is
firm, turn on the liquefied gas cylinder switch, then press the
pressure reducing valve, and then start to ignite.
Note: Before each ignition, open the large
cover on the top to ensure that the residual gas in the oven
chamber is naturally discharged. After ignition is achieved,
install the large top cover back and open the small movable
cover plate on the top cover to maintain convective ventilation
and prohibit complete sealing.
（3）When ignition is conducted,
press the knob deeply to the bottom and turn the
knob leftwards to 90 degrees. After the flame is ignited, press
the knob tightly for 7-8 seconds and then release it.
（4）When the furnace cover needs to
be opened in the combustion process or after the work is
completed, be sure to turn off the burner, then the top cover of
the oven can be opened so as to avoid heat wave scalds.
（5）It is strictly prohibited to
use a tilted or inverted gas cylinder to avoid the phenomenon
that residual objects inside the gas cylinder block the main
bearing and valve holes to cause faults.
（6）This oven is required to be
installed at the well ventilated position.
（7）Please add water before using
the base. |
