|
|
|
6-blade hay cutter
pulverizer with belt conveyor |
|
|
|
|
|
|
|
This
machine is suitable for crushing various grass, corn, wheat, peanuts,
beans, straw, potatoes, carrots, cassava and other root crops.The
processed feed is more convenient for storage. It is a necessary machine
for farmers, small and medium-sized feed processing plants and farms; At
the same time, the machine can also be used together with the feed
granulator to facilitate the feed machine to shape the feed into
granules. |
|
 |
|
Note:
1. In addition to
commissioning according to the commissioning method, before starting,
the machine must be carefully checked to see if there are tools and
objects hindering the startup and operation, and whether the upper
casing is locked.
2. Before starting the machine, it is
necessary to check whether there are sundries in the machine. Except for
processing straw, nothing is allowed to be stacked on the feeding table.
3.
Run for 2-5 minutes before operation, check whether the rotating speed
meets the requirements of the machine, never allow overspeed, and check
whether other parts are abnormal. If everything is normal, the feeding
can be started, and the feeding cannot be excessive, so as to prevent
damage to the supporting power unit and machine parts due to overload
operation.
4. When the machine is
operating, it is forbidden to stand at the grass outlet to prevent
flying objects from hurting the body.
5. Operators are not
allowed to wear gloves, sleeves must be fastened, and those with long
hair must wear safety helmets. All personnel must leave the rotating
plane of belt and rotating parts.
|
|
Product parameter: |
 |
 |
| Product Material： |
Cast iron spray painting |
| Production efficiency: |
≥600KG/H |
| Feed hopper size: |
14.56in*14.56in(37cm*37cm) |
| Power: |
2.2KW |
| voltage： |
220V |
| Applicable Industries:
|
Farms, Home Use, Retail |
|
|
Product analysis: |
 |
|
Feature: |
 |
This machine is
equipped with 6 sets of thickened blades, which can easily cut
materials. Double-sided blades extend the service life of the blades. |
|
This machine is
equipped with a widened and thickened feeding port, which is solid and
firm. All kinds of grass can be fed easily. It is equipped with a
conveyor belt, which can feed automatically, which is more convenient
and fast. |
 |
 |
The screw in the black
circle can be moved back and forth to adjust the tightness of the
conveyor belt. |
|
Customers can choose
the length of material cutting by themselves, and there are two gears
for customers to choose. |
 |
 |
This machine is
equipped with lock nuts to ensure the locking and sealing of the engine
room and improve the safety.
This nut must be locked
when the machine is working. |
|
This machine is
equipped with air switch, which is safer and more secure.
This machine is
equipped with a voltage display screen for a more intuitive reference to
whether the voltage is stable. |
 |
 |
This machine is
equipped with high-quality high-power motor. |
|
The feed inlet and feed
hopper can be installed separately, and can be removed and placed when
not in use, saving space. |
 |
 |
This
machine is equipped with 4 movable wheels, making it convenient for
customers to move and transport. |
|
The adjustment plate
for the opening size of the feeding hopper allows you to choose the size
of the caliber for placing root and stem crops such as potatoes and
carrots, making it more convenient and practical. |
 |
 |
The discharge port can
be flexibly adjusted in angle and can be disassembled, making it
convenient for customers to store and store when not in use. |
|
Adding this bucket can
achieve the crushing of root crops such as potatoes and carrots. Without
this bucket, only straw can be crushed. |
 |
 |
 |
|
Precautions for operation： |
|
In order to ensure the safety and normal operation
of the person and the machine, a special person shall be assigned to be
responsible for the storage and use of the machine. The machine shall
not be operated without learning this procedure and operation technology
and reading the familiar instructions.
1. In addition to commissioning according to the
commissioning method, before starting, the machine must be carefully
checked to see if there are tools and objects hindering the startup and
operation, and whether the upper casing is locked.
2. Before starting the machine, it is necessary to
check whether there are sundries in the machine. Except for processing
straw, nothing is allowed to be stacked on the feeding table.
3. Check whether the electrical equipment is normal
and safe.
4. Check whether the running direction of the main
shaft conforms to the direction indicated by the arrow on the casing. If
not, immediately adjust and close the power switch to ensure the correct
operation of the machine.
5. Run for 2-5 minutes before operation, check
whether the rotating speed meets the requirements of the machine, never
allow overspeed, and check whether other parts are abnormal. If
everything is normal, the feeding can be started, and the feeding cannot
be excessive, so as to prevent damage to the supporting power unit and
machine parts due to overload operation.
6. Feed crops evenly, not too much, so as not to
block the feed inlet. The operator's hand shall not be close to the
feeding belt during operation.
7. In case of blockage, stop the machine
immediately. After the machine stops stably, open the upper cover, clean
the blockage, and then restart.
8. Always pay attention to whether there is
abnormal sound during the operation of the machine. Shut down and power
off immediately in case of abnormality.
9. There shall be no mortar, sand, stone, iron
wire, tool parts or other sundries in the crops to be processed to avoid
damage to the machine or accidents.
10. At the end of each shift, the power supply must
be cut off after all the crops on the feeding table are fed and no more
materials are thrown out at the outlet.
12. When the machine is operating, it is forbidden
to stand at the grass outlet to prevent flying objects from hurting the
body.
13. Operators are not allowed to wear gloves,
sleeves must be fastened, and those with long hair must wear safety
helmets. All personnel must leave the rotating plane of belt and
rotating parts.
|
|
Details: |
 |
|
Different places have different Receptacles. Please note this plug and consult your electrician before purchase.
|
 |
|
 |
 |
|
product
advantages: |
|
1.This
machine is equipped with 6 sets of thickened blades, which can easily
cut materials. Double-sided blades extend the service life of the
blades.
2.This
machine is equipped with a widened and thickened feeding port, which is
solid and firm. All kinds of grass can be fed easily. It is equipped
with a conveyor belt, which can feed automatically, which is more
convenient and fast.
3.Customers
can choose the length of material cutting by themselves, and there are
two gears for customers to choose.
4.The
screw in the black circle can be moved back and forth to adjust the
tightness of the conveyor belt.
5.This
machine is equipped with lock nuts to ensure the locking and sealing of
the engine room and improve the safety.
6.This
machine is equipped with air switch, which is safer and more secure.
7.The
feed inlet can be installed separately, and can be removed and placed
when not in use, saving space.
8.The blades of this machine can be replaced.
9.This machine is equipped with high horsepower and
high-quality motor.
10.The conveying roller of this machine can
fluctuate flexibly according to the amount of material, which is more
humanized.
|
|
Product display: |
 |
 |
 |
|
 |
 |
|
Item Number:
1*6-blade hay cutter pulverizer with belt conveyor (239762) |
|
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
