|
|
220V Vibrating
concrete table motor vibration plate surface platform vibrating
(300137) |
.jpg)
|
| Description |
| Coagulated soil vibration table is
mainly composed of bottom frame, vibrator spring and |
| other parts, table and bottom frame are made of
steel plate and section steel welding, |
| vibration table is an electric motor and a pair
of the same eccentric wheel composition. |
| And through a pair of hanger coupling installed
in the center of the table (opposite), |
| plays the role of smooth, vertical direction in
the process of vibration and compaction. |
| Technical parameters
|
| Mesa dimension |
0.5*0.5M (19.6'*19.6') |
| Frequency |
2860 times/min |
| Amplitude |
0.3-0.6 mm |
| Amplitude power |
0.55kw |
| Voltage |
220 v |
| Maximum load |
100KG |
|
| Feature |
| 1.Thickening spring design: The hardness of
spring is better than that of ordinary spring, |
| vibration sensing effect is better, and the
spring is more durable after thickening. |
| 2.High quality copper core motor: Quality
assurance, long service life, not easy to break |
| down, thick copper wire design, more stable and
worry saving. |
| 3.Thickened table top anti-corrosion treatment:
It is made of thickened steel, painted, |
| anticorrosive and rustproof, which prolongs the
service life of the vibration table. |
| Installation and maintenance
|
| 1.The foundation should be laid before the
vibration table is installed (Use level ruler ) , |
| according to the position of the
bottom frame bolt hole fixed bolts, fixed bolts must be |
| tightened and fixed. |
| 2.When the vibration table is
installed and the machine is debugged, start the machine |
| for |
| 3-5 minutes and then stop.All fixed bolts shall
be inspected and tightened before use if |
| loose. |
| 3.The concrete products should be stabilized on
the vibration table during the process of |
| vibration. The required vibration-compacted
products should be placed symmetrically |
| with the vibration table to balance the load.
The fastening device of vibration- |
| compacted products can be designed and allocated
by users according to their own |
| needs. |
| 4.The bearing of the vibrator should be checked
frequently and cleaned regularly to |
| replace the lubricating oil. Keep the bearing
well lubricated and prolong the service life |
| of the vibrator. |
| NOTICE :The paint on the machine is
slightly off, but the effect is not affected
The machine is 220V and does
not have a plug.
The power line
is not divided into neutral line and live line, and can be directly
connected to the air switch.
|
|
| |
| |
| |
