|
|
|
1600W Flash
Dryer with Photoelectric Sensor Switch |
|
Flash dryer is used after screen
printer, when you print a multi-color image, need a flash dryer to dry
the ink then press next color. This machine is a new design model with
photoelectric sensor switch, only need to adjust the sensing distance,
flash dryer will work automatically.
|
|
Character:
1. Adopting
carbon fiber heating tube, more power than general model, working life
for more than 10000 hours.
2. Size of drying box :16" x 16"
(40x40cm); movable up and down within 14.5" (37cm);
3. Drying temperature could be
different by adjusting the height of drying box.
4. Adjustable height of stander:
26.7" -39" (68-100cm)
5. Equipped with 4 universal
wheels, full set installation tools , thermograph.
6. This flash dryer will keep the
timer setting, it means when you set "10 seconds" this time, when you
turn on next time, it will shows "10 seconds" again.
Voltage: 110V
Power: 1600W
Net Weight: 44lb / 20kg
Gross weight: 49lb/ 22kg
Packing size: 30" x 17" x 11"
(76x44x28 cm)
|
|
Operation
instruction:
Turn on the switch, press "+" to increase drying
time, Press "-" will decrease. After setting time, display panel shows
"o" it means count down starting; when timing is over, display panel
shows "F" stop working automatically.
Photoelectric sensor switch adjustment:
1. Switch on, move induction
object, when detector sensing the object, display panel will shows "o"
, it mean the distance is suitable and machine start to work.
Taking away the object, flash dryer
will shows "F' . If dryer do not stop automatically when the object
leaving, please repeat this step to test a distance.
2. Machine will beeping 2-3 seconds
when heating tube start / stop working. If operator do not have next
step, it will beeping again and last 10 seconds.
 |
|
Item
included
1 set of 1600W
Flash Dryer for All Screen Printing (006273) |
|
