Drying Cabinet for Cambered Screen Plate

This machine is specially matched for all kinds of cap and mask printing machines produced by our company. Surface of the heating table is high quality tempered high temperature resistant glass, not afraid of water, glue, acid and alkali resistance, resistant to cleaning.

Heat and melt the shaping resin of the hard material hat screen printing machine.

Drying upper screen plate; The heating and melting of the lower shaping resin can be carried out simultaneously without affecting each other.

Max suggest screen frame size : 13.7" x 10.2"

Parameter:

Black heating pad :15.7” x 11"  ( 40x28 cm)

power: 110V/ 120W

inner dimension of the box : 13.7"x 10.2"x 7.4"  (35x26x19 cm)
　

suitable for screen frame size:

Temperature test data:

Under room temperature 25 ℃, turn on and set 120℃;

After 15 minutes, temperature of the up space is 115℉  （45 ℃）

After 30 minutes, temperature of the up space is 131℉ （55℃）and stay at this temperature. 

Special notice:

It may take 40-50 minutes to melt the shaping resin. For quick heating, use a household electric oven or a high temperature hot air gun. But don't use microwave oven.

Using steps:

1. Avoid dust and drying the screen plate after degrease and cleaning ;

2. Light-proof drying after coating photosensitive emulsion;

3. Used for heating the shaping resin used in the hard material hat printing machine;

4. Take off the light-proof box, using the heating plate alone, and place the products that need to be dried after printing on the heating plate to dry.