Torque wrench

Torque Wrench

Torque Wrench （1/2" 0-300Nm)

Parameter
Model	TLB300
Torque Range	0-300N.m
Precision Guarantee Range	60-300N.m
Drive side tenon size	0.5”×0.5”
Appearance size	21.65”×2.83”×2.95”
Weight	7lb
Scale scribed line	3N.m/grid

Features

Appearance is delicate.

Panel mirror processing

The dial scale clear
Double pointer, torsion memory function
Positive and negative two-way can be used
Double precision both level 3.

Suitable for 1/2-Inch socket.

The humanized handle design

Overview

1.   Torque wrench is a kind of very sophisticated equipment. It is only used to tighten screws, bolts and nuts to the required torque.
2. Don't let it used as a crowbar or general ratchet wrench.
3. Do not use the wrench as a hammer.
4. When using, do not exceed the maximum torque value of the wrench. Applying force can only handle again, do not attach any extension rod on the product.
5. Wrench torque values must be adjusted to the same as the required torque value. If you adjust the torque value is too large or too small, both can seriously damage your wrench screw equipment.
6. Don't disassembling   the wrench. Incorrect disassembling may cause the damage to the internal structure, which can seriously damage the   wrench.
7. It   must be checked regularly.

Using method

TLB type torque wrench is a kind of used for threaded fastener torque measuring instrument indicator, It can be in the range within the scope of any testing. Suitable for high accuracy   requirements of fastening torque test.
1. Before using, you must adjust the zero firstly!
(1) Choose the correct sleeve, then set on the wrench.
(2) Rotate the dials on the black table cover, make the primary pointer to 0.
(3) Rotate the yellow bottom on the cover,make the driven pointer close to the active pointer.
When  clockwise, let the yellow pointer on the right side of the black pointer.
When counterclockwise, let the black pointer on the right side of the yellow pointer.
2. When using, you should exert tighten slowly and steadily, until   driven a pointer to the required torque value.
3. When stop work, active pointer automatic back to zero, driven   pointer is still on the scale value of directives, and can   accurately read torque values. At the top of the knob and rotating dial, driven   pointer also return to zero, the next time can be use.

Item Included:(022034)

1. Torque wrench *1
2. Instruction *1
　