|
1.
Adjust the exit gate of spring.
2. Place
the aluminum plate to hold springs after dispensered.
3.
Please confirm the turnplate in the charging barrel is running with
high speed.
4. Take
out the lid on the cylinder and you will see springs twist together.
5. The
springs after dispensered were spouted on the AL plate.
-
If the springs are spouted without separating, please press
the gate valve to shrink the exit, the springs will be
separated and spouted automatically.
-
If springs are running in the cylinder for long time(more
than 10s) and cant eject, please pull up the gate, they will
be ejected after separated.
|
