|
新建网页 1
Colloid Mill
Grinder |
General
Introduction:
The second
generation of ultra-fine particles and new mechanical equipment for wet
process. Suitable for all kinds of emulsifying homogenization,
emulsifying, dispersing, mixing, crushing, grinding, widely used in food
(jam, fruit juice, protein powder, dairy products, beverages, etc.) ,
medicine (all kinds of syrup, nutrition, medicine, paste, etc.) ,
chemical industry (paint, dyes, paint, grease, oil, catalyst, etc.) and
emulsified asphalt, coal flotation agent, emulsion explosives and other
industries.
|
Operating Principle:
The basic
working principles of colloid mill are cutting, high speed grinding and
mixing.
This machine replies on two tapered tooth surfaces in relative motion to
grind. One spins
at a stationary, the other keeps static. Then enable materials between
tooth surfaces get
severely cut and fiction. At the same time, they will effectively
disperse, emulsify, grind,
and homogenate under the action of high-frequency vibration and
high-speed vortex.
|
Structure:
JM colloid mill
is simple and compact, small volume, light weight, convenient
operation. It is composed of grind head part, base transmission part and
electric motor
part. All parts that will touch material are made of high quality
stainless steel. Dynamic and
static grinder is the key part of this machine. According to different
characters of solid
materials, the teeth of grinder are different. Motor, according to
colloid Mills require, is
designed specially and installing water retaining plate on flanged end
cover of motor to prevent leakage. |
|
Installation:
JM colloid mill
runs smoothly and shake slightly, so according to need, you can place
it on a flat surface, or concrete foundations.
|
|
|
Other
information:
Type |
Rotary shaft grinding machine |
The way it works |
Grinding |
Motor Power |
1.1KW |
Rotation speed |
2880r/min |
Capacity of grinding basket |
2L |
|
|
Operating Precautions:
1. Join supply
pipe and outlet. Connect the cooling water pipe and exhaust pipe
leakage.
2. Install the power launcher, shaft ammeter and indicator. After
connecting power, open
machine and identify motor turning operation, it should be
anti-clockwise from the
inlet.
3.Adjust the grinder gap, two handles unscrew (counter clockwise twist)
and then turn
the adjustment ring clockwise. Extend one hand into base direction and
turn the motor
fan, when feeling a little friction turning during adjusting rings,
please stop. At the
same time, between readings to determine alignment pointer to 0. But
read on the
graduated ring numbers to remember, this number is not 0 but ground
clearance is 0,
and turn back adjusting ring slightly ground clearance is greater than
0, generally in
the case meet the requirements of processing materials fineness, can
make grinding
gap is slightly larger. This makes grinding a long service life. Then
tighten clockwise
the handle locking the adjusting ring so that grinding gap fixed.
4.Clean inside body and disinfect.
5. Novice most note of a items: connect cooling water (according to
material, you can
connect cooling water or not, the main role of connect cooling water is
used to cool
down the mill head and to extend mill head using years), special
considerations when
turning on: 1) Start colloidal mill to make it stay moving and
immediately close it after
motor turns normal. It is strictly prohibited to operate machine without
material. 2)
Feed or enter water to test machine, turn on after pouring material into
the hopper.
6. Never allow quartz, broken glass, scrap metal hard substance mixed in
materials,
otherwise, they will wear and tear the grind.
7. Pay attention to the loading of the motor, reduce feeding timely.
8. You cannot close the discharge valve during colloid mill operating to
avoid
9. Colloid mill is a high precision machine, small gap between grinders.
Running speed
is high, so the operator should keep the post strictly.
10. After using, you should thoroughly clean it to avoid mechanical seal
coherence
causing leakage. |
Details |
|
|
|
|
Item Number: Colloid Mill Grinder--160176 |
You can make
order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|