1.Always test the pressure with the oil
before the new machine is used for the first time.
2.The machine will shake during
transportation. Please tighten all screws again before using the
machine.
3.Test the pressure of the machine,
prohibit the use of no viscosity liquid such as (toluene, acetone,
water,
etc.) test the working pressure, to use
oil and other lubricants to test the pressure of the machine, if empty,
the pressure gauge does not show the
pressure.
4.Test method: Pour the lubricating oil
into the barrel of the machine, close the valve, the gun head to the
outside, open the drill, when the
pressure gauge shows 300-400 kg of pressure, turn off the drill, open
the
valve, spray the lubricating oil back
into the oil barrel, it is OK, the pressure test is successful, the new
machine must be used for the first time
before the oil test pressure, remember, the above content must be
carefully read.
5.The
color of parts varies slightly with different production batches. |