|
|
|
6614lb/3000kg Pneumatic Punch Press
Machine |
|
|
|
|
|
|
 |
|
Product Features: |
|
The pneumatic press is the high-pressure
gas produced by the compressor, which is transported to the
solenoid valve through the gas pipe. The working state of the cylinder
is controlled by the movement of the
solenoid valve through the switch, and the punching is completed.
1 .Compressed air as power source, high
efficiency and easy operation, can reduce labor, can be applied to
manual
operation integration, automated assembly line .
2 .Simple structure, convenient operation, cheap price, superior
performance, no noise produced during the hydraulic
system and electric standby, can save electricity consumption reduce
production cost, has the very high cost
performance .
3. Easy adjustment of output, need to adjust the air pressure is
adjustable up to the required pressure, high yield.
4.Equipped with guide plate, high accuracy, can adapt to high speed
precision impact load .
5.According to different products or mould, adjust the speed, and the
size of the pressure and stamping time .
6.Optional manual switch control, with emergency stop switch, can also
be controlled by a controller.
7.Microcomputer control system, can choose manual, semi- automatic and
fully automatic operation. |
|
Range of application:
Suitable for electronics, electrical appliances, instruments, meters,
cameras, watches, jewelry, hardware and
garment, shoes and hats. |
 |
|
Specification : |
|
Voltage |
110V |
|
Pressure |
6614lb/3000kg |
|
The die hole diameter |
0.98inch/2.5cm |
|
Working Countertops Size |
12.6*10.2inch/32*26cm |
|
Outer diameter of trachea |
0.39inch/0.1cm |
|
Booster cylinder specification |
3.94inch-0.39inch/100mm-10mm |
|
Working
air pressure |
0.5-0.8MPa |
|
 |
|
Details: |
 |
 |
 |
Air source processor, through the
pressure gauge at any time to
observe the change of air source
pressure, effective separation of
water, oil and other impurities in the
air, air purification, improve the
service life of the machine. |
High quality cylinder quick action,
quick response, secondary supercharging
travel can be adjusted
within the effective range. |
Equipped with a controller, easy
to switch
between manual operation and automatic
operation .(single cylinder machine, just
set
1, 2, 3 section number. 1 is the
pressing
time setting; 2 is the second time
to
increase the setting; 3 is the return time
setting) |
|
 |
 |
 |
Two-handed switch, two-handed
operation, safer. Equipped with
emergency stop switch, one key
stop, more efficient. |
A clamp with an inner diameter of
0.98 ",
equipped with a guide plate, is more
precise and stable. |
Widened and enlarged work surface
with
1.9 "diameter blanking hole, 2 T-slots for
easy securing of items. |
|
|
|
|
Note:: |
1. 46# antiwear hydraulic oil should be added to the
hydraulic cylinder. It is recommended to replace the hydraulic oil
after one year of use. (Due to ex-factory debugging, there will be a
small amount of hydraulic oil in the machine, please prepare your own
hydraulic
oil after receiving the goods).
2.Check whether the machine bolts are tightened before
working. If they are loose, they must be tightened before working.
Check whether the air pipe is properly connected to prevent air leakage
and make the machine unable to work normally.
3. Avoid placing your hand under the punching shaft
during work to avoid accidents .
4.Do not wipe the machine with a damp cloth to avoid
rusting the machine .
5.When disassembling, installing and adjusting the
mold fixture, the machine must be turned off, and standby operation is
strictly prohibited to
avoid personal injury .
6.The rated pressure of the air compressor is 0.8mpa.
The capacity of the air compressor storage tank is about 60L,the larger
the capacity, the
longer the service time and the more stable it is. The displacement is
optional 200L/min, the larger the displacement, the larger the
applicable
machine model.
7.Note :The actual output pressure is about 80% of the
theoretical pressure. |
|
|
|
Item Number:6614lb/3000kg Pneumatic Punch
Press Machine 230324 |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost. |
|
