Peanut sheller

   Peanut shelling machine is used for separating the shells and kernels of peanuts and tea seeds. It has the characteristics of high peeling rate, good cleanliness, simple structure, easy operation, low power consumption, low noise, and saving manpower. The processed peanut tea seeds have low crushing rate, clean sorting, good color, and few impurities.

This machine is equipped with an air switch, which is safer and more reliable.

The motor is equipped with a voltage display, which facilitates customers to observe whether the voltage is sufficient more intuitively.

In order to ensure the safety and normal operation of the person and the machine, a special person shall be assigned to be responsible for the storage and use of the machine. The machine shall not be operated without learning this procedure and operation technology and reading the familiar instructions.

1. In addition to commissioning according to the commissioning method, before starting, the machine must be carefully checked to see if there are tools and objects hindering the startup and operation。

2. Before starting the machine, it is necessary to check whether there are sundries in the machine.

3. Check whether the electrical equipment is normal and safe.

4. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation.

5. Feed crops evenly, not too much, so as not to block the feed inlet. The operator's hand shall not be close to the feeding belt during operation.

6. In case of blockage, stop the machine immediately. After the machine stops stably, open the upper cover, clean the blockage, and then restart.

7. Always pay attention to whether there is abnormal sound during the operation of the machine. Shut down and power off immediately in case of abnormality.

8. There shall be no mortar, sand, stone, iron wire, tool parts or other sundries in the crops to be processed to avoid damage to the machine or accidents.

Requirements for Shelling Processing Materials:

1. The dryness and wetness of peanuts should be appropriate. If they are too dry, the breakage rate will be high, and if they are too wet, it will affect work efficiency.

2. Generally stored peanuts are relatively dry. In order to make them dry and wet properly, they need to be peeled in winter. Before shelling, spray about 10 kilograms of warm water evenly on 50 kilograms of fruit, cover with plastic film for about 10 hours, and then let it dry in the sun for about 1 hour to start shelling. In other seasons, the time for covering with plastic film is about 6 hours, and the rest is the same.

3. You can also soak dried peanuts in a large water tank, immediately remove them and cover them with plastic film for about a day. Then, let them dry in the sun and start shelling when they are dry and wet.

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.