|
|
|
Integrated machine
for cutting grass, kneading
silk, and crushing
machine |
|
This machine is suitable for cutting
and kneading various crops such as grass, corn, wheat, peanuts, beans,
straw, etc. Processed feed is easier to store. This machine can also
crush grains such as millet, rice, rice, and soybeans. It is an
essential machine for farmers, small and medium-sized feed processing
plants, and farms; At the same time, this machine can also be used in
conjunction with a feed granulator, making it convenient for the feed
machine to shape feed into pellets. |
|
 |
|
Note:
1. In addition to
debugging according to the debugging method, the machine must be
carefully checked for any tools or objects that hinder startup and
operation, and all parts of the machine must be tightened before
starting up.
2. Before starting the machine, it is
necessary to check whether there are sundries in the machine. Except for
processing straw, nothing is allowed to be stacked on the feeding table.
3.
Run for 2-5 minutes before operation, check whether the rotating speed
meets the requirements of the machine, never allow overspeed, and check
whether other parts are abnormal. If everything is normal, the feeding
can be started, and the feeding cannot be excessive, so as to prevent
damage to the supporting power unit and machine parts due to overload
operation.
4. When the machine is
operating, it is forbidden to stand at the grass outlet to prevent
flying objects from hurting the body.
5. Operators are not
allowed to wear gloves, sleeves must be fastened, and those with long
hair must wear safety helmets. All personnel must leave the rotating
plane of belt and rotating parts.
|
|
Product parameter: |
 |
 |
 |
| Product Material： |
Cast iron spray painting |
| Production efficiency: |
1000-1500KG/H |
| Feed hopper size: |
26.77in*18.5*9.25in(68cm*47*23.5cm) |
| Power: |
4KW |
| voltage： |
220V |
| Applicable Industries:
|
Farms, Home Use, Retail |
|
|
Product analysis: |
 |
|
1.Feed inlet for cutting grass and kneading silk
2.Crushed material discharge port
3.Mobile casters
4.Thickened bracket
5.Feed baffle
6.Motor
7.Capacitance
8.Voltage display
9.Belt protective cover
10.Baffle adjustment nut
11.Rice, millet, soybeans, and other
miscellaneous grains feed into the mouth
12.Discharge port protective cover
13.Cutting grass and kneading silk discharge
port |
|
Feature: |
|
This machine is
equipped with a widened and thickened feeding port, which is solid and
firm. All kinds of grass can be fed easily. |
 |
 |
This machine is equipped with a thick
and sturdy bracket, which is more sturdy and durable. |
|
This machine is
equipped with a voltage display screen for a more intuitive reference to
whether the voltage is stable. |
 |
 |
This machine is
equipped with high-quality high-power motor. |
|
The feed inlet and feed
hopper can be installed separately, and can be removed and placed when
not in use, saving space. |
 |
 |
This
machine is equipped with 4 movable wheels, making it convenient for
customers to move and transport. |
|
The adjustment plate for the opening
size of the hopper allows you to choose the aperture size for placing
grains such as rice and millet, making it more convenient and practical. |
 |
 |
The discharge port can
be flexibly adjusted in angle and can be disassembled, making it
convenient for customers to store and store when not in use. |
|
This bucket can crush various grains
such as rice, millet, and soybeans. |
 |
 |
The machine is equipped with a belt
protection cover to prevent accidents during operation. |
|
Precautions for operation： |
|
In order to ensure the safety and normal operation
of the person and the machine, a special person shall be assigned to be
responsible for the storage and use of the machine. The machine shall
not be operated without learning this procedure and operation technology
and reading the familiar instructions.
1. In addition to commissioning according to the
commissioning method, before starting, the machine must be carefully
checked to see if there are tools and objects hindering the startup and
operation.
2. Before starting the machine, it is necessary to
check whether there are sundries in the machine. Except for processing
straw, nothing is allowed to be stacked on the feeding table.
3. Check whether the electrical equipment is normal
and safe.
4. Check whether the running direction of the main
shaft conforms to the direction indicated by the arrow on the casing. If
not, immediately adjust and close the power switch to ensure the correct
operation of the machine.
5. Run for 2-5 minutes before operation, check
whether the rotating speed meets the requirements of the machine, never
allow overspeed, and check whether other parts are abnormal. If
everything is normal, the feeding can be started, and the feeding cannot
be excessive, so as to prevent damage to the supporting power unit and
machine parts due to overload operation.
6. Feed crops evenly, not too much, so as not to
block the feed inlet. The operator's hand shall not be close to the
feeding belt during operation.
7. In case of blockage, stop the machine
immediately. After the machine stops stably, open the upper cover, clean
the blockage, and then restart.
8. Always pay attention to whether there is
abnormal sound during the operation of the machine. Shut down and power
off immediately in case of abnormality.
9. There shall be no mortar, sand, stone, iron
wire, tool parts or other sundries in the crops to be processed to avoid
damage to the machine or accidents.
10. At the end of each shift, the power supply must
be cut off after all the crops on the feeding table are fed and no more
materials are thrown out at the outlet.
12. When the machine is operating, it is forbidden
to stand at the grass outlet to prevent flying objects from hurting the
body.
13. Operators are not allowed to wear gloves,
sleeves must be fastened, and those with long hair must wear safety
helmets. All personnel must leave the rotating plane of belt and
rotating parts.
|
|
Details: |
 |
 |
 |
 |
|
 |
 |
|
product
advantages: |
|
1.
This machine is equipped with widened and thickened feeding ports, which
are sturdy and firm. All kinds of grass can be easily fed.
2. The feeding port can be installed separately and can be disassembled
and placed when not in use, saving space.
3. This machine is equipped with a high horsepower and high-quality
electric motor.
4. This machine can achieve the cutting and crushing of wheat straw,
hay, and other grains, as well as the crushing of corn, rice, millet and
other grains. It is versatile and more convenient.
|
|
Product display: |
 |
 |
 |
|
 |
 |
|
Item Number:
1*Integrated machine for cutting grass, kneading silk, and crushing
machine (239919) |
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
