|
|
|
6-blade hay cutter
with conveyor belt |
|
This machine is suitable for cutting various crops such as grass, corn, wheat, peanuts, beans,
straw, etc. Processed feed is easier to store. It is an
essential machine for farmers, small and medium-sized feed processing
plants, and farms; At the same time, this machine can also be used in
conjunction with a feed granulator, making it convenient for the feed
machine to shape feed into pellets. |
|
 |
|
Note:
1. In addition to
debugging according to the debugging method, the machine must be
carefully checked for any tools or objects that hinder startup and
operation, and all parts of the machine must be tightened before
starting up.
2. Before starting the machine, it is
necessary to check whether there are sundries in the machine. Except for
processing straw, nothing is allowed to be stacked on the feeding table.
3.
Run for 2-5 minutes before operation, check whether the rotating speed
meets the requirements of the machine, never allow overspeed, and check
whether other parts are abnormal. If everything is normal, the feeding
can be started, and the feeding cannot be excessive, so as to prevent
damage to the supporting power unit and machine parts due to overload
operation.
4. When the machine is
operating, it is forbidden to stand at the grass outlet to prevent
flying objects from hurting the body.
5. Operators are not
allowed to wear gloves, sleeves must be fastened, and those with long
hair must wear safety helmets. All personnel must leave the rotating
plane of belt and rotating parts.
|
|
Product parameter: |
 |
 |
 |
| Product Material： |
Cast iron spray painting |
| Production efficiency: |
500-1000KG/H |
| Size of feed inlet (with
conveyor belt): |
23in*11.8in(58.5cm*30cm) |
| Power: |
3KW |
| voltage： |
220V |
| Applicable Industries:
|
Farms, Home Use, Retail |
|
|
Product analysis: |
 |
|
Feature: |
|
This machine is equipped with a widened
and thickened feeding port, which is solid and firm. All kinds of grass
can be fed easily. It is equipped with a conveyor belt, which can feed
automatically, which is more convenient and fast. |
 |
 |
This machine is equipped with a thick
and sturdy bracket, which is more sturdy and durable. |
|
This machine is
equipped with a voltage display screen for a more intuitive reference to
whether the voltage is stable. |
 |
 |
This machine is
equipped with high-quality high-power motor. |
|
This machine is equipped with 6 sets of
thickened blades, which can easily cut materials. Double-sided blades
extend the service life of the blades. |
 |
 |
This
machine is equipped with 4 movable wheels, making it convenient for
customers to move and transport. |
|
The screw in the black circle can be
moved back and forth to adjust the tightness of the conveyor belt. |
 |
 |
Customers can choose the length of
material cutting by themselves, and there are two gears for customers to
choose. The gears of the
new machine may be tightly engaged (in the initial use of gear shifting,
manual rotation of the gears is required after shutting down to assist
in switching) |
|
This machine is equipped with lock nuts
to ensure the locking and sealing of the engine room and improve the
safety. This nut must be
locked when the machine is working.
|
 |
 |
This machine is equipped with air
switch, which is safer and more secure. |
 |
|
We suggest that
high-power machines should be directly connected to the main power
supply, as the voltage reaching the machine is stable. If the voltage is
unstable and the current exceeds the rated current of the motor, it is
easy to burn out the starting capacitor.
It is recommended to
directly connect to the power supply as much as possible. If the machine
is not connected to the power supply, different situations may occur,
and the wires are not durable. The wires will gradually burn out over
time.
|
|
Precautions for operation： |
|
In order to ensure the safety and normal operation
of the person and the machine, a special person shall be assigned to be
responsible for the storage and use of the machine. The machine shall
not be operated without learning this procedure and operation technology
and reading the familiar instructions.
1. In addition to commissioning according to the
commissioning method, before starting, the machine must be carefully
checked to see if there are tools and objects hindering the startup and
operation.
2. Before starting the machine, it is necessary to
check whether there are sundries in the machine. Except for processing
straw, nothing is allowed to be stacked on the feeding table.
3. Check whether the electrical equipment is normal
and safe.
4. Check whether the running direction of the main
shaft conforms to the direction indicated by the arrow on the casing. If
not, immediately adjust and close the power switch to ensure the correct
operation of the machine.
5. Run for 2-5 minutes before operation, check
whether the rotating speed meets the requirements of the machine, never
allow overspeed, and check whether other parts are abnormal. If
everything is normal, the feeding can be started, and the feeding cannot
be excessive, so as to prevent damage to the supporting power unit and
machine parts due to overload operation.
6. Feed crops evenly, not too much, so as not to
block the feed inlet. The operator's hand shall not be close to the
feeding belt during operation.
7. In case of blockage, stop the machine
immediately. After the machine stops stably, open the upper cover, clean
the blockage, and then restart.
8. Always pay attention to whether there is
abnormal sound during the operation of the machine. Shut down and power
off immediately in case of abnormality.
9. There shall be no mortar, sand, stone, iron
wire, tool parts or other sundries in the crops to be processed to avoid
damage to the machine or accidents.
10. At the end of each shift, the power supply must
be cut off after all the crops on the feeding table are fed and no more
materials are thrown out at the outlet.
12. When the machine is operating, it is forbidden
to stand at the grass outlet to prevent flying objects from hurting the
body.
13. Operators are not allowed to wear gloves,
sleeves must be fastened, and those with long hair must wear safety
helmets. All personnel must leave the rotating plane of belt and
rotating parts.
|
|
Details: |
 |
 |
 |
 |
|
 |
 |
|
product
advantages: |
|
1.
This machine is equipped with widened and thickened feeding ports, which
are sturdy and firm. All kinds of grass can be easily fed.
2. The feeding port can be installed separately and can be disassembled
and placed when not in use, saving space.
3. This machine is equipped with a high horsepower and high-quality
electric motor.
4. This machine can achieve the cutting and crushing of wheat straw,
hay, and other grains, as well as the crushing of corn, rice, millet and
other grains. It is versatile and more convenient.
|
|
Product display: |
 |
 |
 |
|
 |
 |
|
Item Number:
1*6-blade hay cutter with conveyor belt (239925) |
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
