Electrothermal incubator

●The working room is made of stainless steel or high quality steel plate, which is processed and treated with anticorrosion. The shelf height is adjustable, and the four corners form a semicircle, which is convenient for cleaning.

●“Double-layer liner” design, safe and reliable, beautiful appearance, easy to open, small space, is the factory workshop processing and manufacturing, office experiment ideal choice.

●All-round three-dimensional forced air supply technology to ensure the temperature uniformity in the studio.

●Double-layer tempered glass observation window, adjustable height of test shelf in the work room, clear observation, easy to use.

●Microcomputer intelligent digital display temperature control instrument accurate temperature control, ensure that the temperature without overshoot, with timing, over-temperature alarm and other functions.

●Good thermal insulation design, can long-term high-temperature operation, long service life, easy to replace, the greatest degree to achieve green, energy-saving, environmental protection.

●High-temperature silicone sealing strip, with lock-type loose and tight regulation of the door lock to ensure good sealing, to prevent heat loss.

●Unique geometric cavity clean design to ensure the perfect active protection of samples.

●Turn on the power switch, about 3 seconds later into the normal display state.

●Press the set key to enter the temperature set state. The lower row shows the temperature setting value, which can be changed to the desired setting value by shifting, increasing or decreasing the key; then click the“Set” key.

●If the alarm is over-temperature due to the change of the temperature setting value, it can be silenced by pressing any key.

●“◀”Click on this key in the set state to make the set value shift flicker changes.

●“▼”Click this key in the set state, the set value can be decremented, long press this key can make the set value successive decrements. In a timed state, pressing the key for 3 seconds can stop the program.

●“▲”Click this key in the set state, the set value can be incremented, long-press this key to set the value of successive increments.

●If no key is pressed within 1 minute, the controller will return to the normal display state automatically.

●If the upper row of the display window of the controller shows”--”, which means that the temperature sensor or the controller itself is out of order, please carefully check the temperature sensor and its wiring.　

●Place the equipment on a dry platform, or on the floor, and keep it > 50CM from the wall.

●According to the needs of the experimental items placed on the tray above, turn on the power supply, switch, according to the intelligent instrument operating instructions to set the required temperature.

●Turn off the power when the equipment is not in use and keep it dry and clean.

Item Number: Electrothermal incubator--239936

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.