Model KZL32 Pneumatic Bundling
Tensioner and Model KZS32 Pneumatic Bundling sealer are novel bundling
tools which have high level of mechanization. Two tools should be united
that all actions(Tensioning, sealing, breaking) can be finished.
These tools are pneumatic bundling
tools,which have many characteristics such as lightweight, simple
operation, safety and can be suitable for bundling steel, tube and
plate.
Note:You need have
a pump(This item need 0.4~0.6MPa)
Model:KZL32
Air Pressure:0.4~0.6MPa
Weight of tool:less than 5kg
No-load speed of strap:more than
5m/min
Tension:8.5KN
Steel strap type:32*(0.8~1.2)mm
1.There should be 0.8m3/min air flow
and a 0.4 to 0.6Mpa compressed air source in the workshop;
2.The average air consumption during
bundling is 1m3;
3.The compressed air should go into
the tool through the filter,the regulator and the lubricator(Called
three-union in short) respec-tively;
4.Branch lines are taken from the top
of main,the air hose is 14mm.
