|
新建网页 1

1100W RC-210E
Electronic Pulse Precision Metal Bench Lathe 8"*16" |
Miniature lathe is mainly used for
processing the end face of various rotary surfaces and rotating
bodies. For example, turning inside and outside cylindrical
surface, cone surface, ring groove and forming turning surface,
turning end face and all kinds of commonly used metric thread,
cone surface, ring groove and forming turning surface, turning
end face and all kinds of commonly used metric thread.
The design of this new lathe is a great innovation, it solves
many disadvantages of other lathes in the past, greatly improves
the processing accuracy and processing efficiency, can save a
lot of precious time for you, choose it you will not regret!! |
Model: |
RC-210E |
Voltage: |
AC110V(Brushless
Motor) |
Power: |
1100W(1.5HP) |
Length of center: |
15.75"(400mm) |
Swing Over Bed: |
8.27"(210mm) |
Rotary diameter of tool
rest: |
5.51"(140mm) |
Spindle bore: |
1.50"(38mm) |
Diameter of chuck: |
4.92"(125mm) |
Width of lathe bed: |
3.94"(100mm) |
Thread standard: |
Metric/imperial/customized |
Turning delay start
time: |
1s-30s |
Number of Spindle
Speeds: |
Infinitely variable
speeds |
Range of Inch Threads: |
10-44T.P.I |
Range of metric threads: |
0.5mm-3mm |
Spindle taper: |
MT5 |
Knife rest labour: |
Horizontal four-station |
Spindle rotation speed: |
50-2500rpm |
Precision of the
spindle: |
0.01mm |
Automatic feed range: |
0.01mm-0.4mm |
Tail frame taper: |
MT2 |
Maximum stroke of tool
rest plate: |
2.16"(55mm) |
Maximum stroke of middle
plate: |
2.95"(75mm) |
Maximum stroke of bottom
plate: |
19.68"(500mm) |
Maximum stroke of
tailstock sleeve: |
2.36"(60mm) |
Package size: |
35.8"*18.5"*17.3"(91cm*47cm*44cm) |
Net weight/Gross weight: |
125.7LB(57kg)/159.8LB(72.5kg) |
Product Features & Advantages |
 |
Metric & Imperial
Switching between
metric and
imperial is no longer required by
changing gears! Only need to
operate through the panel, save
a lot of time!
|
Gearless Design
New gearless
design! Brand new
belt drive! Lower noise, no longer
need to change gears to adjust the
processing thread, only need to
operate on the panel, processing
efficiency greatly improved!
|
 |
 |
Self-acting Feed
Self-acting feed
design solves
many disadvantages of manual
feeding, and can set self-acting
feed speed through the panel,
greatly improve the machining
accuracy and efficiency.
|
Speed Control
Knob
The spindle
rotation speed is
divided into two adjustable gears,
respectively 50-1250rpm and 1250
-2500rpm. The panel can observe
the rotation speed in real time,
which is flexible and convenient.
|
 |
 |
4-way Tool Post
The adjustable
4-way tool post on
the lathe allows you to easily change your cutting tools. The 8
screws allow you to better grip the tool and finish the
machining efficiently. |
Three Jaw Chuck
High-precision
three-jaw chucks
with 125mm clamping diameter
are used to clamp square and
round materials firmly ,We also
offer optional four-jaw chucks.
|
 |
 |
Switch
Control panel
above the design of
forward and reverse switch and
start & emergency stop switch, easy to operate, in case of
emergency can immediately cut off the power supply, to ensure
personal safety.
|
Metric Scale
Precise metric
scale are provided
on the saddle handle, the tailstock
handle and the movable center,
allowing for more accurate and
professional work.If you need the
inch scale can be customized.
|
 |
 |
Accurate
Tailstock
The tailstock is
movable and fixed,
with a maximum center distance of
31.5 inch at the far right. With the
MT#2 taper in tailstock spindle, this
lathe machine is capable of adjusting set screws for accurate
operation.
|
Wide Application
This mini metal
lathe is suitable for
many processing tasks including
turning, drilling, threa ding and
cutting and so on.It can meet most
of your DIY processing needs.
|
 |
- It can automatically switch between
metric and inch systems without changing gears.
- In the X axis direction can be automatic feed, no
manual;Automatic feed speed can be adjusted;Automatic feed range
reached 0.01mm-0.4mm!
- There are three ways to start turning: manual start, automatic
start, delay automatic start.
- Indexing function: you can switch the direction of turning
tool through "DIR" button; Angles can be cleared with one click.
- Control panel set parameters after saving and start, can
realize reciprocating turning function and turning thread. |
Product Presentation & Details |
RC-210E lathe *1 |
Base oil pan *1 |
English manual *1 |
Oil can *1 |
Hexagon wrench *5 |
Open spanner *2 |
The screwdriver *2 |
Chuck jaw *3 |
Chuck spanner *1 |
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|