|
|
新建网页 1
|
1100W RC-210E Precision
Metal Bench Lathe 8"*32" |
Miniature lathe is mainly used for
processing the end face of various rotary surfaces and rotating
bodies. For example, turning inside and outside cylindrical
surface, cone surface, ring groove and forming turning surface,
turning end face and all kinds of commonly used metric thread,
cone surface, ring groove and forming turning surface, turning
end face and all kinds of commonly used metric thread.
The design of this new lathe is a great innovation, it solves
many disadvantages of other lathes in the past, greatly improves
the processing accuracy and processing efficiency, can save a
lot of precious time for you, choose it you will not regret!! |
| Model: |
RC-210E |
| Voltage: |
AC110V 50/60Hz(Brushless
Motor) |
| Power: |
1100W(1.5HP) |
| Length of center: |
31.50"(800mm) |
| Swing Over Bed: |
8.27"(210mm) |
| Rotary diameter of tool
rest: |
5.51"(140mm) |
| Spindle bore: |
1.50"(38mm) |
| Diameter of chuck: |
4.92"(125mm) |
| Width of lathe bed: |
3.94"(100mm) |
| Thread standard: |
Metric/imperial/customized |
| Turning delay start
time: |
1s-30s |
| Number of Spindle
Speeds: |
Infinitely variable
speeds |
| Range of Inch Threads: |
10-44T.P.I |
| Range of metric threads: |
0.5mm-3mm |
| Spindle taper: |
MT5 |
| Knife rest labour: |
Horizontal four-station |
| Spindle rotation speed: |
50-2500rpm |
| Precision of the
spindle: |
0.01mm |
| Automatic feed range: |
0.01mm-0.4mm |
| Tail frame taper: |
MT2 |
| Maximum stroke of tool
rest plate: |
2.16"(55mm) |
| Maximum stroke of middle
plate: |
2.95"(75mm) |
| Maximum stroke of bottom
plate: |
26.77"(680mm) |
| Maximum stroke of
tailstock sleeve: |
2.36"(60mm) |
| Package size: |
49.2"*18.9"*18.1"(125cm*48cm*46cm) |
| Net weight/Gross weight: |
152LB(69kg)/187LB(85kg) |
|
Note:The yellow on
the lathe bed and chuck is antirust oil, Belong to normal
phenomenon,which can be wiped off with oil or gasoline before
use.Be sure to clean the anti-rust oil on the chuck before
starting and turn the chuck by hand to prevent the chuck from
jamming and causing the circuit board to burn out!! |
| Product Features & Advantages |
- It can automatically switch between
metric and inch systems without changing gears.
- In the X axis direction can be automatic feed, no
manual;Automatic feed speed can be adjusted;Automatic feed range
reached 0.01mm-0.4mm!
- There are three ways to start turning: manual start, automatic
start, delay automatic start.
- Indexing function: you can switch the direction of turning
tool through "DIR" button; Angles can be cleared with one click.
- Control panel set parameters after saving and start, can
realize reciprocating turning function and turning thread. |
| Product Presentation & Details |
| RC-210E lathe *1 |
Base oil pan *1 |
English manual *1 |
| Oil can *1 |
Hexagon wrench *5 |
Open spanner *2 |
| The screwdriver *2 |
Chuck jaw *3 |
Chuck spanner *1 |
|
You can
make order with no worries.
Any concerns just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
