|
|
Product Overview
|
1100W RC-210E
Electronic Pulse Precision Metal Bench
Lathe
8"*39" |
Miniature lathe is mainly used for
processing the end face of various rotary surfaces and rotating
bodies. For example, turning inside and outside cylindrical
surface, cone surface, ring groove and forming turning surface,
turning end face and all kinds of commonly used metric thread,
cone surface, ring groove and forming turning surface, turning
end face and all kinds of commonly used metric thread.
The design of this new lathe is a great innovation, it solves
many disadvantages of other lathes in the past, greatly improves
the processing accuracy and processing efficiency, can save a
lot of precious time for you, choose it you will not regret!! |
|
Model: |
RC-210E |
|
Voltage: |
AC110V 50/60Hz(Brushless Motor) |
|
Power: |
1100W(1.5HP) |
|
Length of center: |
39.37"(1000mm) |
|
Swing Over Bed: |
8.27"(210mm) |
|
Rotary diameter of tool rest: |
5.51"(140mm) |
|
Spindle bore: |
1.50"(38mm) |
|
Diameter of chuck: |
4.92"(125mm) |
|
Width of lathe bed: |
3.94"(100mm) |
|
Thread standard: |
Metric/imperial/customized |
|
Turning delay start time: |
1s-30s |
|
Number of Spindle Speeds: |
Infinitely variable speeds |
|
Range of Inch Threads: |
10-44T.P.I |
|
Range of metric threads: |
0.5mm-3mm |
|
Spindle taper: |
MT5 |
|
Knife rest labour: |
Horizontal four-station |
|
Spindle rotation speed: |
50-2500rpm |
|
Precision of the spindle: |
0.01mm |
|
Automatic feed range: |
0.01mm-0.4mm |
|
Tail frame taper: |
MT2 |
|
Maximum stroke of tool rest plate: |
2.16"(55mm) |
|
Maximum stroke of middle plate: |
2.95"(75mm) |
|
Maximum stroke of bottom plate: |
26.77"(680mm) |
|
Maximum stroke of tailstock sleeve: |
2.36"(60mm) |
|
Package size: |
57.9"*18.5"*20.1"(147cm*47cm*51cm) |
|
Net weight/Gross weight: |
172.0LB(78kg)/238.1LB(108kg) |
|
Note: The
yellow on the lathe bed and chuck is antirust oil, Belong to
normal phenomenon, which can be wiped off with oil or gasoline
before use. Be sure to clean the anti-rust oil on the chuck
before starting and turn the chuck by hand to prevent the chuck
from jamming and causing the circuit board to burn out!! |
| Product Features & Advantages |
 |
1. Metric & Imperial:
Switching between metric and
imperial is no longer required by changing gears! Only need
to operate through the panel, save a lot of time!
|
2. Gearless Design:
New gearless design! Brand new
belt drive! Lower noise, no longer need to change gears to
adjust the processing thread, only need to operate on the
panel, processing efficiency greatly improved!
|
 |
 |
3. Self-acting Feed:
Self-acting feed design solves
many disadvantages of manual feeding, and can set
self-acting feed speed through the panel, greatly improve
the machining accuracy and efficiency.
|
4. Speed Control Knob:
Spindle rotation speed is
divided into two adjustable gears:50-1250 rpm and
1250-2500rpm. Panel can observe the rotation speed in real
time,which is convenient and flexible.
|
 |
 |
5. 4-way Tool Post:
The adjustable 4-way tool post
on the lathe allows you to easily change your cutting tools.
The 8 screws allow you to better grip the tool and finish
the machining efficiently.
|
6. Metric Scale:
Precise metric are provided on
the saddle handle,the tailstock handle and the movable
center, allowing for more accurate and professional work.
|
 |
 |
7. Accurate Tailstock：
Tailstock is movable and
fixed, with a maximum center distance
of 39.4" at the far right. With the MT#2 taper in tailstock
spindle, this lathe is capable of adjusting set screws for
accurate operation.
|
8. Three Jaw Chuck:
High-precision three-jaw
chucks with 125mm clamping diameter are used to clamp square
and round materials firmly, We also offer optional four-jaw
chucks
|
 |
 |
9. Switch:
Lathe above the design of
forward and reverse switch and start & emergency stop
switch, easy to operate, in case of emergency can
immediately cut off the power supply, to ensure personal
safety.
|
10. Wide Application:
This lathe can be used for
turning end face, internal and external thread, Buddha
beads, as well as drilling, chamfering, cutting and other
processing. Can meet most of your DIY processing needs.
|
 |
| - It can automatically switch
between metric and inch systems without changing gears.
- In the X axis direction can be
automatic feed, no manual; Automatic feed speed can be adjusted;
Automatic feed range reached 0.01mm-0.4mm!
- There are three ways to start
turning: manual start, automatic start, delay automatic start.
- Indexing function: you can
switch the direction of turning tool through "DIR" button;
Angles can be cleared with one click.
- Control panel set parameters
after saving and start, can realize reciprocating turning
function and turning thread. |
| Product Presentation & Details |
|
RC-210E lathe *1 |
Base oil pan *1 |
English manual *1 |
|
Oil can *1 |
Hexagon wrench *5 |
Open spanner *2 |
|
The screwdriver *2 |
Chuck jaw *3 |
Chuck spanner *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
