|
|
Product Overview
|
HK-5W 110V Portable Weaving Auto Weld Carriage Welding Trolley for
Alloy Welding Machine Steel Structure with Swing 150-1900MM/MIN Oscillation
Auto Welding Carriage
 |
| The HK-5W
Weaving
Welding
Carriage is an auxiliary tool, is used with welding
machine, ensures an efficient welding process by providing a
stable and consistent welding speed, resulting in high-quality
welds, can replace manual welding, improve welding efficiency
and quality. It features advanced technology, including a swing
function which allows for even more precise and accurate welds. This machine is used in many
fields such as ship, bridge, train, steel structure, petroleum
industry and so on. It is suitable for welding many structures
such as stiffened web plate, ribbed plate, cross position,
boxing beam etc. |
| Model: |
HK-5W |
| Voltage: |
110V |
| Power: |
17W |
| Welding
speed: |
5.91-74.80"/min
(150-1900mm/min) |
|
Adsorbability: |
44.09lbs(20Kg) |
| Range of
working angle: |
±45° |
| Range of
proceeding angle: |
10° |
Range of
adjusting welding torch
(Up, down, forward and backward): |
1.57"(40mm) |
| Left/right
pause time: |
0-2.5s |
| 0scillating
motor: |
Brushed motor |
| Swing speed: |
0-100 |
| Swing angle: |
±15° |
| Set position
of deviation: |
0-±8° |
| Package size: |
23.23"*14.96"*16.14"(59cm*38cm*41cm) |
| Net weight/Gross weight: |
31.97lbs(14.5kg)/36.60lbs(16.6kg) |
| Product Features & Advantages |
|
 |
| A. The HK-5W
weaving welding trolley is automatic. It can obtain wider weld
seams at one time. B. You can
adjust swing speed, swing angle, offset position of centre and
length of stay. Suitable for different sizes of beads. Maximum
carriage speed is 1900mm/min under non-welding condition.
C. The magnetized handle can reduce a
small amount of magnetism, which is convenient for cleaning iron
chips and moving the carriage.
D. There is an arc shrinking device. Arc
shrinking time is about 0-7 seconds.
E. The trolley is equipped with a
permanent magnetic guide rail to avoid welding line deviation.
F. The trolley has small capacity, light
weight and easy to carry. Even unskilled workers can operate it
easily. The control device can be detached and used as a remote
control box. |
 |
| - Reduce work
intensity and improve working condition.
- Improve working efficiency: 1.5 times of
manual welding.
-Avoid defects in weld quality caused by
human factors. The defect rate of manual operation is about
200%, while the auto welding cart has no defect rate. In terms
of overall efficiency, it is 200% more efficient than manual
operation.
- The high degree of automation ensures
weld quality.
- Unskilled workers can also master the
operation of the machine.
- The HK-5W swing auto-welding trolley
has a swing arm design that allows for larger weld seam sizes
than a standard fillet welder. It not only has the advantage of
being lightweight, but also improves welding efficiency. |
 |
A device
that rolls along the base material surface to guide the
exact welding position, which improves welding efficiency
and quality, and ensures an efficient welding process.
|
It is
designed with high-temperature resistant rubber wheels, and
the four-wheel drive mode allows the trolley to walk with a
high degree of smoothness. At the same time, the welding
is not easy to stick.
|
 |
It is
convenient for the installation and movement of the car, and
the permanent magnet is installed to avoid the phenomenon of
the car leaving the welding line.
|
The
trolley is equipped with an inductive stop switch. When welding
stops, the trolley will stop automatically. It is convenient
for one person to operate several machines.
|
|
Check and
maintain the unit regularly in accordance with the following, so
that the welding trolley is always in optimal condition.
(a) Is there dust accumulation?
- Control box, welding torch adjustment part switch should be
wiped and kept clean frequently, no welding dust.
(b) Does the dirt accumulate?
- The sediment at the end, torch head, guide wheel, driving
wheel and slider parts should be removed to avoid affecting the
safe operation of the car.
(c) Are the screws of the torch fixing frame and guide wheel
loose?
- Screw loosening will make the car walk poorly and the weld
path is not uniform, the screw part should always confirm its
tightening state.
(d) Is it difficult to adjust the X-Y slider?
- The slider should be lubricated frequently.
(e) Confirm whether joints, connecting wires, hoses, welding
torches are broken or damaged?
- Check regularly whether the joint is loose, and whether the
connection line, hose, welding torch is broken or damaged.
(f) Is there any abnormal sound or fever?
- Check the guide wheel, motor, welding torch and other
components regularly for abnormalities.
(g) Is the fuse blown?
- If the power indicator is not on during welding, check the
fuse first.
| Product Presentation &
Details |
|
Product
Prestation &
 |
|
| HK-5W Weaving Welding Trolley
*1 |
English Manual *1 |
| Hex Wrench Set *1 |
Control Box *1 |
| Power Cable Assembly *1 |
Wiggler Cable Assembly *1 |
|
Fuse
*3 |
|
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
