|
|
Optical Eyeglasses Display Case
新建网页 1
|
Solder Pot Bath |
Its electronic temperature
adjusting board is produced by imported components party,which may
choose the temperature according to the request.
It is convenient for using and maintaince,and it has good thermal
reaction,quick soldering.
When firstly using,it is normal if the electric heating core has few
smoke. |
|
 |
Using Notice
1) Before using,be sure the
power must supply with “ground wire”,working without that is banned.
2) Adjusting the knob in the high-end at the beginning,until the tin
melt transferred back to the tin water temperature is not too high since
the required temperature profile,tin water temperature of
300-350℃,otherwise cause aging people to engage in tin pot,tin water
black or yellow,acidic flux,tin pot in the ultra-high temperature effect
will be faster corrosion perforation leakage tin.Must be turn off the
power before youo leave,in order to avoid accidents. |
|
Parameters
| Model |
cm310 |
Voltage |
110v |
| Power |
300w |
Melting tin
quantity |
1200g (2.65lbs) |
| Melt tin time |
About 8 minutes |
Tin pot diameter |
100mm (3.94") |
Instruction |
 |
| 1 set of Solder Pot
Bath 152117 |
|
