|
Solder Tools |
| With the development of
science and technology, electronic technology penetrates into various
industrial sectors and in all areas of life.As a electric
enthusiast,it's an essential basic skill to install and weld of
electronic products.In the electronic engineering practice, by
assembling and debugging an electronic product,can improve the way of
thinking, especially in ability. |
 |
|
Electric Soldering Iron |
 |
Electric soldering iron uses the advanced
optimization design and meticulously product.The handle is made of new
high-strength and heat-resistant material,and it's also with
high-quality and durable heating element.The iron has the festure of
safe, beautiful look and lightweight.So it becomes more and more
popular.
Specifications:
| Name |
Electric Soldering Iron |
| Power |
40w |
| Voltage |
110V |
| Length |
23cm (9") |
Note:
The first time using the new electric iron, is powered by hot child may
appear , it's normal to have slight smoke which is because of electric
heating element electrified ,and it will disappear later.
Electric iron should be kept dry, and never using after wet or rained.
Please check the voltage before using it.
|
|
Soldering Smoke
Absorber |
|
 |
Mount the CXG493 Soldering Smoke
Absorber on this optional Arm Stand,and you have a powerful smoke
absorber that can freely adjusted for maximum ease of using and optimum
smoke absorption.Once the job is done,the unit can be quickly and easily
swung to one side,where it will be out of the way but ready in an
instant when needed for the next job.
CGX493 is a newly
developed product which is a high performance fan and an activated
carbon filter designed to absorb flux and lead fumes.
Specifications:
| Name |
CGX493 Soldering Smoke
Absorber |
| Power Consumption |
16W(50Hz)/14W(60Hz) |
| Outer Dimensions |
220*270*168mm(8.7"*10.6"*6.6") |
| Weight |
1500g (3.3lbs) |
|
Operation Instruction:
Open the Filter Guider,and install the Activated Carbon Filter.Then
close the Filter Guide.
Loose the Knob and adjust the angle.
Replace the Filter
Under normal operating conditions,the filter should
be replaced once a month since absorption capacity decline.
The filter may also need replacement when the dust adhere.(Never allow
the filter to become wet.)
Activated-Carbon Filter Specifications:
| Size |
130*130*10mm(5.1"*5.1"*0.4") |
| Amount of
Activated-Carbon Filter |
7g (0.02lb) |
| Max.absorbing
weight of noxious components per filer |
2g (0.004lb) |
|
 |
|
Hot
Glue Gun and Glue Stick |
|
 |
The hot glue gun uses
high-technology ceramic PTC thermistor as heating originals.The PTC
thermistor can be in constant temperature automatically.The temperature
will not raise when the temperature raises to the designed one of the
glue stick ,this can prevent the hot glue gun from the damage of heating
element,and extending the service life.
Features:
1、The product can be applied to the glue stick which is
10mm(0.4")diameter.
2、The glue stick is inserted into the end of glue gun until is inside.
Plugging in and preheating 5-8 minutes.Pulling the trigger to extruded
sol, and can control the volume.
3、During the using,it's not necessary to remove the glue stickif you
can't use up it.Next time,it can be used directly after preheating 5-8
minutes.
Specifications:
| Name |
Hot Glue Gun |
| Power |
40w |
| Length |
130mm (5") |
|
|
Digital Multimeter and Digital Electrical Tester Pen |
DT9205A digital multimeter is easy to
operate, accurately reading, full-featured,easy to carry.
Specifications:
| Name |
DT9205A Digital Multimeter |
| DC Voltage |
200mV-1000V ±(0.5％+1) |
| AC Voltage |
200mV-750V ±(0.8％+3)
|
| DC Current |
20mA-20A ±(0.8％+1) |
| AC Current |
20mA-20A ±(1％+3) |
| Resistance |
200Ω－2000MΩ ±(2.5％+3) |
| Capacitance |
2nF-200μF |
Digital electrical tester pen is a kind
of tester pen, which belongs to electrical and electronic tools,and is
used to test whether charged in the electric wire.This tester pen body
is with LED display,you can read the tested voltage directly.
Specifications:
| Name |
Digital Electrical Tester Pen |
| Voltage |
12-250V（AC\DC） |
|
 |
|
Anti-static Tweezers and Solder Sucker |
 |
ESD-10(Standard): using to weld
circuit boards and installing or replacing parts
ESD-11:Longer
than ESD-10,appling to precision electronic parts operation.
ESD-12(high elasticity):The
tweezers tip is stronger than standard's.It won't bend during clipping
board with strong force and the parts won't fall.
ESD-13 (round):Avoiding to damage components and appling to take
out chip.
ESD-14(fine):The tweezers tip is extra-fine and sharp,appling to
high-density integrated circuit chip operation.
ESD-15:The tweezers tip is curved,appling to take out components
in narrow place.
Solder Sucker is made of
aluminum.It is easy to carry and operate. |
|
Component Package |
 |
|
Diode Package |
|
8 kinds, total
100 pcs |
|
1N4148
25pcs |
1N4007
25pcs |
1N5819
10pcs |
|
1N5399
10pcs |
FR107
10pcs |
FR207
10pcs |
|
1N5822
5pcs |
1N5408
5pcs |
|
|
|
Ceramic Capacitor
Package |
| 24
kinds, 10pcs in each kind |
| 6P |
10P |
18P |
| 20P |
22P |
25P |
| 30P |
33P |
47P |
| 68P |
101P |
221P |
| 331P |
471P |
681P |
| 102P |
222P |
332P |
| 472P |
103P |
223P |
| 333P |
473P |
104P |
|
|
Resistor Package |
|
25 kinds, 20 pcs in each kind |
| 10 |
47 |
100 |
| 200 |
330 |
470 |
| 680 |
1K |
1.5K |
| 2K |
3.3K |
4.7K |
| 6.8K |
10K |
15K |
| 20K |
33K |
47K |
| 68K |
100K |
150K |
| 330K |
470K |
1M 2M |
|
|
Adjustable
Resistor Package |
|
9kinds, 5 pcs in each kind |
|
100(101) |
500(501) |
1K(102) |
|
5K(502) |
10K(103) |
50K(503) |
|
100K(104) |
500K(504) |
1M(105) |
|
|
Electrolytic Capacitor
Package |
| 12
kinds, 10 pcs in each kind |
| 0.1UF/50V |
1UF/50V |
3.3UF/50V |
| 4.7UF/50V |
10UF/25V |
22UF/25V |
| 33UF/25V
|
47UF/25V |
100UF/25V |
| 220UF/25V |
330UF/25V |
470UF/25V |
|
|
XTL Package |
|
10 kinds, 3 pcs in each kind |
| 6MHZ |
8MHZ |
11.0592MHZ |
| 12MHZ |
16MHZ |
22.1184MHZ |
| 20MHZ |
24MHZ |
32.768KHZ |
| 48MHZ |
|
|
|
|
Audion Package |
| 11
kinds, 10 pcs in each kind |
| S9012 |
S9013 |
S9014 |
| S9015 |
S9018 |
2N3904 |
| 2N3906 |
2N5551 |
2N5401 |
| S8050 |
S8550 |
|
|
|
Universal Circuit Board |
Universal Circuit Board
are accordance with standard IC spacing (2.54MM,0.1") and full with
bonding pads.We offer different sizes of circuit boards,enthusiast can
instrument components on their own wishes.
specifications:
1、There is two bonding pads on both sides,and it can be welded
components on both sides.
2、The thickness of the circuit boards is 1.6mm（0.06"),and is in good
material.
3、Single hole, the distance between two holes is 2.54mm(0.1"), and the
diameter is 0.95mm(0.04") .
4、The bonding pad which both sides of one hole is connected
|
 |
