|
|
|
Straw, root, vegetable, and fruit grinder |
|
This
machine is suitable for banana tree, banana tree, sweet potato, radish,
potato, carrot, sweet potato vine, potato vine, grass, green corn stalk,
yellow bamboo grass and other plants slicing or shredding. Processed
feed is easier to store. It is a necessary machine for farmers, small
and medium-sized feed processing plants and farms. At the same time, the
machine can also be used with the feed granulator to facilitate the feed
machine to form feed into pellets. |
|
 |
|
Note:
1.
Run for 2-5 minutes before operation, check whether the rotating speed
meets the requirements of the machine, never allow overspeed, and check
whether other parts are abnormal. If everything is normal, the feeding
can be started, and the feeding cannot be excessive, so as to prevent
damage to the supporting power unit and machine parts due to overload
operation.
2. When the machine is
operating, it is forbidden to stand at the grass outlet to prevent
flying objects from hurting the body.
3. Operators are not
allowed to wear gloves, sleeves must be fastened, and those with long
hair must wear safety helmets. All personnel must leave the rotating
plane of belt and rotating parts.
|
|
Product parameter: |
 |
| Product Material： |
Cast iron spray painting |
| Production efficiency: |
≥600KG/H |
| Power: |
2.2KW |
| voltage： |
220V |
| Applicable Industries:
|
Farms, Home Use |
|
|
Product analysis: |
 |
|
Feature: |
 |
The machine is equipped with a large
feed port for easy feed handling. |
|
This machine is equipped with air
switch, which is safer and more secure.
This machine is equipped with a voltage
display screen for a more intuitive reference to whether the voltage is
stable.
|
 |
 |
This machine is equipped with
high-quality high-power motor. |
|
This machine is equipped with 4 moving
casters, which is more convenient to move. (Can be disassembled and put
down without using moving casters) |
 |
 |
|
Note:
The color of the
accessories in the above picture, red and black, will be randomly
shipped. |
|
Precautions for operation： |
|
In order to ensure the safety and normal operation
of the person and the machine, a special person shall be assigned to be
responsible for the storage and use of the machine. The machine shall
not be operated without learning this procedure and operation technology
and reading the familiar instructions.
1. In addition to commissioning according to the
commissioning method, before starting, the machine must be carefully
checked to see if there are tools and objects hindering the startup and
operation, and whether the upper casing is locked.
2. Before starting the machine, it is necessary to
check whether there are sundries in the machine. Except for processing
straw, nothing is allowed to be stacked on the feeding table.
3. Check whether the electrical equipment is normal
and safe.
4. The staff should not touch the operating parts,
let alone open the casing and remove the safety cover.
5. Run for 2-5 minutes before operation, check
whether the rotating speed meets the requirements of the machine, never
allow overspeed, and check whether other parts are abnormal. If
everything is normal, the feeding can be started, and the feeding cannot
be excessive, so as to prevent damage to the supporting power unit and
machine parts due to overload operation.
6. Feed crops evenly, not too much, so as not to
block the feed inlet. The operator's hand shall not be close to the
feeding belt during operation.
7. In case of blockage, stop the machine
immediately. After the machine stops stably, open the upper cover, clean
the blockage, and then restart.
8. Always pay attention to whether there is
abnormal sound during the operation of the machine. Shut down and power
off immediately in case of abnormality.
9. There shall be no mortar, sand, stone, iron
wire, tool parts or other sundries in the crops to be processed to avoid
damage to the machine or accidents.
10. At the end of each shift, the power supply must
be cut off after all the crops on the feeding table are fed and no more
materials are thrown out at the outlet.
12. When the machine is operating, it is forbidden
to stand at the grass outlet to prevent flying objects from hurting the
body.
13. Operators are not allowed to wear gloves,
sleeves must be fastened, and those with long hair must wear safety
helmets. All personnel must leave the rotating plane of belt and
rotating parts.
|
|
Details: |
 |
|
Different places have different Receptacles. Please note this plug and consult your electrician before purchase.
Note:
We suggest that
high-power machines should be directly connected to the main power
supply, as the voltage reaching the machine is stable. If the voltage is
unstable and the current exceeds the rated current of the motor, it is
easy to burn out the starting capacitor.
It is recommended to
directly connect to the power supply as much as possible. If the machine
is not connected to the power supply, different situations may occur,
and the wires are not durable. The wires will gradually burn out over
time.
|
|
Product display: |
 |
 |
 |
|
 |
|
Item Number:
Straw, root, vegetable, and fruit grinder (239855) |
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
