The gap between the two rollers of this machine is adjustable, which can be automatically increased or decreased according to the size of the beans, and the size of the roller gap can also be adjusted manually. Suitable for shelling of peas of different sizes. The design of the stainless steel enclosure can effectively prevent the peeled beans from jumping around.

Parameters:

Voltage: 220V 

Power: 20W

Current: 0.16A

Speed: 120r/min

Output: 15-25 KG/hour (different sizes and weights of beans)

Insulation class: E

Please note: This machine can only be used to peel the shells of edamame or peas.

Use and maintenance:

1. After the bean peeler is working, there will be broken pods on the rollers and brushes. It is necessary to remove the brush and clean the roller with a wire brush, which can be done while the machine is running. Wash the brush with clean water and dry naturally. Next time you use it, it should be tightly attached to the roller.
2. Use a clean cloth dipped in water to clean the bean coat pieces stuck on the stainless steel hoarding. If there is too much, it can be removed and washed with clean water.
3. If the peeling machine is not used for a long time, the roller must be cleaned, and then apply a small amount of oil or cooking oil to prevent rust.

1*Pea peeling machine